PDA

View Full Version : Need port program



Problem Child
02-09-2008, 06:40 PM
I did a search and found nothing, but I have an odd shaped box, with an internal volume of 8.45 cu.ft. and need 2 slot ports to get 30 hz. The only ones I found only do square, or triangle boxxes. Can someone whos got one help me, or point me to where I can get one. The inside height avalible where I need the port is 15.5 ", so it can be that tall, just need a width, and a depth.

anthonyjessg
02-09-2008, 06:41 PM
go either here http://reaudio.com/speaker_box/LPort_Box_Calc.html

or here http://www.subwoofertools.com/

Problem Child
02-09-2008, 06:45 PM
go either here http://reaudio.com/speaker_box/LPort_Box_Calc.html

or here http://www.subwoofertools.com/

I tried the reaudio one, but in your other site, where should I go to, I didn't find it?

anthonyjessg
02-09-2008, 06:47 PM
where it says panel layout v4

anthonyjessg
02-09-2008, 06:51 PM
i dont kno of any programs that does 2 slot ports

Problem Child
02-09-2008, 06:53 PM
where it says panel layout v4


I guess I tried both of them, you keep giving me programs that ask for the height an width of the box, it's an odd shape with 2 pockets, so I can't put the dimensions on them, all I have is the inside cu. ft. and the size of the area where the subs and ports will be.

anthonyjessg
02-09-2008, 07:03 PM
http://www.rockfordfosgate.com/rftech/box_wizard.asp

well without the exact description of the box there can be many variations of odd shaped boxes. try this site

Problem Child
02-09-2008, 07:11 PM
Tried that one 2....