PDA

View Full Version : Box Design for (2) 10" Fi BL's needed!



JarvisB
02-08-2008, 09:52 AM
I got a design from a guy already, but wanted to see if anyone got a better design..

It is going to be in my 1995 ford explorer..

I would like it to be 2.5 cubes tuned at 32 hz (ported)

Max dimensions:
Length: 40 1/2 inches
Height: 18 inches
Depth: wont matter (shouldnt be too long because it is a pretty small box)

I would like the subs to be on the top, and the port on the side facing towards the hatch..

Any help would be very much appreciated, Thanks in Advance

J31Rob
02-08-2008, 09:53 AM
suffocation.

JarvisB
02-08-2008, 09:56 AM
huh?

BL10


DUAL 1 | DUAL 2

Fs: 41.5 Hz | 40.3 Hz
Re: 0.75 Ohms/coil | 1.5 Ohms/coil
Qms: 5.43 | 5.58
Qes: .37 | .44
Qts: .35 | .32
Mms: 155g | 164g
Cms: .95mm/N | .95mm/N
Sd: 310cm^2 | 310cm^2
Vas: 12.8 l | 12.8 l
Spl: 85.8dB 1W/1m | 85.7dB 1W/1m
Bl: 12.8 N/A | 19.0 N/A
Xmax: 21mm
Rms: 1000W *
Sealed box: N/A cuft
Ported box: .5-1.2 cuft @ 30-37Hz
Sub OD: 11.000”
Cut ID: 9.250”
Mounting depth: 6.2500”
Displacement: 0.11cuft

tell me how can that be "suffocation"?

JarvisB
02-08-2008, 03:02 PM
anyone?

mobeious
02-08-2008, 04:22 PM
post the design so they can see what ur talking about and if they have comments

JarvisB
02-08-2008, 07:25 PM
Here is what mobeious came up for me..

http://i7.photobucket.com/albums/y290/mobeious/Untitled.jpg

so any input?

I really like his design, but wanted to make sure that I got the one that I like the best

JarvisB
02-09-2008, 10:21 AM
anyone?

JarvisB
02-09-2008, 03:29 PM
nobody wanna chime in?

BrianChia
02-09-2008, 04:41 PM
http://img143.imageshack.us/img143/3710/2x10fibl265cf32hzkc6.png

JarvisB
02-09-2008, 08:49 PM
Nice.. Is this box tuned at 32hz?

mobeious
02-10-2008, 09:27 AM
I got a design from a guy already, but wanted to see if anyone got a better design..

It is going to be in my 1995 ford explorer..

I would like it to be 2.5 cubes tuned at 32 hz (ported)

Max dimensions:
Length: 40 1/2 inches
Height: 18 inches
Depth: wont matter (shouldnt be too long because it is a pretty small box)

I would like the subs to be on the top, and the port on the side facing towards the hatch..

Any help would be very much appreciated, Thanks in Advance




dont know if u seen that but thats why the port in the middle wont work

JarvisB
02-10-2008, 11:19 AM
Why not?

I never said I want the port to be in the middle anyway..

BTW, you got a pm..