PDA

View Full Version : 2 L7's in a regular cab?



tigermax14
02-05-2008, 06:48 PM
Is it possible to build a box behind the seat of a regular cab silverado that will have enough airspace to sound good for 2 10 inch L7's?

ViolentAudio
02-05-2008, 06:50 PM
each take .66 ft min sealed. i had room in my reg cab s-10 for 2....i sure hope your silverado has more room than my s-10

jdc753
02-05-2008, 07:43 PM
Could you possible get some rough measurements? Shouldn't be too hard to squeeze out about 2 ft^3 sealed behind your seat, mounting depth will dictate the most though, and is what will take up the most of your legroom.

tigermax14
02-05-2008, 08:12 PM
I can get some better measurements tommorow but i think i can go about 53 in. long, 8 in. wide at the bottom, im not real sure about the height or width at the top because my middle backrest doesnt fold down into a console and it will get in the way if I go up very high.

tigermax14
02-05-2008, 10:55 PM
how would two 8" L7s sound?

MTXman
02-05-2008, 10:56 PM
you can fit 2 10's in there man.

Blove1991
02-05-2008, 11:37 PM
Im 6 flat and 220lbs and I fit 3ft^3 NET at 35hz for (2) 10's in my reg. cab S-10, and I'm satisfied with my leg room.

Snug top is hopefully coming though :)

EDIT: Ill sell you the box if interested?? PM me

jdc753
02-06-2008, 12:50 PM
with those dimensions and assuming a 4" top depth and 16" height you can get 1.91 ft^3 doesn't look like quite enough mounting depth though for 12's but probably 10's would work. Or if you could increase the height a bit would help, or the top depth would be the most beneficial.