PDA

View Full Version : Loudest, smallest driver... what is it?



OoMesKoO
01-28-2008, 11:51 AM
Title pretty much explains it. I want to fiberglass some custom a-pillars like Mr. Meade has done. Although, id like to start with something small. Whats the loudest, smallest driver i can use?

Anyone recommend anything?

Kevinn
01-29-2008, 11:03 PM
If you want the smallest driver just look in your pants.....


J/k lol

JimJ
01-29-2008, 11:04 PM
Piezo horns...

OoMesKoO
01-30-2008, 09:08 PM
Piezo horns...

Explain.

Not too familiar. Any driver specifically?

squeak9798
01-30-2008, 09:50 PM
Your question is vague, and it doesn't sound like you've formulated a very good plan.

What size driver are you looking for, and size constraints do you have ?

What frequency range does this driver need to cover ?

What other speakers are you going to be matching this driver with ?

OoMesKoO
01-31-2008, 11:38 AM
I apoligize. I definitley should have worded it a little better.




Your question is vague, and it doesn't sound like you've formulated a very good plan.

What size driver are you looking for, and size constraints do you have ?

Im looking for smallest possible. Something to just brighten up the frontstage. They will be molded into the A-pillars on the drivers and passenger sides with fiberglass. Maybe 4" or so?

What frequency range does this driver need to cover ?

Id like to leave the "tweeter" sound alone. Something midrange. Although, it wont be enclosed. So there wont be any midbass i would assume.

What other speakers are you going to be matching this driver with ?

And they will be matched to a set of OZ Audio 6.5" Comps.

WhoSayWho?
01-31-2008, 01:55 PM
I apoligize. I definitley should have worded it a little better.





And they will be matched to a set of OZ Audio 6.5" Comps.

Not to hijack, but are those the new or older version?

OoMesKoO
01-31-2008, 01:59 PM
there the older version. Ive had them for a while and i love them. Just not loud enough.

dragnix
01-31-2008, 02:01 PM
are you looking at tweeters or mids? or both?