PDA

View Full Version : My other hobby besides audio....pics***



hurricanes0688
01-19-2008, 01:17 AM
Finally started the engine build on my mustang. 306, twisted wedge aluminum heads ported from 61 to 64cc, double valve springs good .700 lift, TF stage 2 cam, 542 lift 224 duration. 1.6 roller rockers. Polished Cobra ported intake manifold, ported to match heads. Im hopin for 380 hp with a tune and the exhaust and all that other good stuff on there. My goal is to be close 150 db's with the xxx's in the back, and run 12 flat. Let me know what you think so far.

http://i17.tinypic.com/8aztx7t.jpg

http://i12.tinypic.com/6yusoc6.jpg

tEh koRnDog
01-19-2008, 01:17 AM
nice

DeboDaddy
01-19-2008, 01:18 AM
Sbf Ftl, Sbc Ftw!!!! :D :D

tapout
01-19-2008, 01:19 AM
I can dig it.

DownSouth954
01-19-2008, 01:24 AM
My buddy has a money race next weekend against a 306 Mustang that claims 340+ hp to the rear wheels. Even though my friend should whoop his butt I'm curious to see how the stang does in the top end. I'll just have to see :)

I assume this is going into a fox body / SN95 ?

dwman
01-19-2008, 01:25 AM
wow very nice pics!

my other hobby used to be racing atv's as you can the me in the pic airing it out lol then about 5 seconds after that pic was taken i nose dived right into face of huge 120ft triple and wrecked bad and broke my right leg shattered tibia and shoved it out the skin and broke knee in half lol.actually didnt happen after that pic but did happen. lol just thought i would share that with you.

hurricanes0688
01-19-2008, 01:28 AM
doesnt sound fun...lol yea its going in my black 93 gt. So yea im hoping for to possibly eclipse 400 some people said i should have around 410 with my other stuff plus a good *** dyno tune, also puttin 373 in the back so it should kick some decent ***

JimJ
01-19-2008, 01:30 AM
I have no idea what you said, but that looks pretty.

:)

stuckinok
01-19-2008, 01:36 AM
secks

tez4life
01-19-2008, 01:36 AM
Finally started the engine build on my mustang. 306, twisted wedge aluminum heads ported from 61 to 64cc, double valve springs good .700 lift, TF stage 2 cam, 542 lift 224 duration. 1.6 roller rockers. Polished Cobra ported intake manifold, ported to match heads. Im hopin for 380 hp with a tune and the exhaust and all that other good stuff on there. My goal is to be close 150 db's with the xxx's in the back, and run 12 flat. Let me know what you think so far.

http://i17.tinypic.com/8aztx7t.jpg

http://i12.tinypic.com/6yusoc6.jpg



Fukin nice man, sounds like you got some solid goals ahead of you, hope you succeed :)

hurricanes0688
01-19-2008, 01:40 AM
ill post vids of the system as well, i made new black vinyl doorpanels with 6 kicker ss midbass on each door, powered by a rf t4004, Some dome tweeters, rf 3.5s and some stock 6x8s in the back off a audiobahn intake amp which i got for like 20 bucks but does the job for what i need it lol

and in the back 4.7 cubes or so, 3 4'' ports tuned bout 34-35 hz. I have 2 05 xxx 12s poweredoff a kx2500.1, stuff shakes the hell outta the car looks like the hatch is gonna pop off when real low notes play...gotta get it metered def in the high 140s so hopin for fast and loud

casper97ta
01-19-2008, 01:42 AM
Bowtie man myself but that is one nice looking motor. I can always appreciate a good build and some good HP #'s no matter what car its in. Upload some sound clips when you get it done. Whats the lobe on that cam? Should sound mean as hell.

audioholic
01-19-2008, 01:57 AM
I think 12 flat in the quarter, with that much extra weight, and less than 400hp, is a big goal. ;) Beautiful engine. keep us posted on the project.

skylineTT
01-19-2008, 02:31 AM
hmm i was looking for a newer 5.0 to swap into my 93 5.0 thunderbird. i like your build up though! its really clean!

blackbonnie
01-19-2008, 02:35 AM
very nice

hurricanes0688
01-19-2008, 02:39 AM
with all the stuff in there, and nitto 555 tires, the car has a ford motorsport longblock 260hp at the crank ran a 14.22. So i think it could be possible. Still the car weighs prob 3400 with me and the system in it, and i can take it out in 10 mins anyway to so ill see what it does

hurricanes0688
01-19-2008, 02:40 AM
skyline tt, i have a ford motorsport longblock 70k on it, 260hp. Im pullin it out in order to put this engine in , would that be somethin ur intrested in?

audioholic
01-19-2008, 02:42 AM
with all the stuff in there, and nitto 555 tires, the car has a ford motorsport longblock 260hp at the crank ran a 14.22. So i think it could be possible. Still the car weighs prob 3400 with me and the system in it, and i can take it out in 10 mins anyway to so ill see what it doesIm putting dual xxx's in a truck right now. You are talking 400lbs for the speakers and box alone, bare minimum. And if you are aiming for 150, you better think about adding some big heavy batts too. :(

In that car, keeping it fast and doing mid 140's would still be impressive.

hurricanes0688
01-19-2008, 02:46 AM
idk my box weighs prob 80 and speakers 55 a piece, plus 1 2400 and kx2500. yea, but the car stock weighs 2900 lbs, so 400+ me 155 is like 3450 so still pretty light over all

speedfreak28
01-19-2008, 02:57 AM
im assuming by u saying good dyno tune that your keeping the fuel injection, if you dont , you could easily run solid 12's with a carb andhave an easier time tuning

RumbleNTheTrunk
01-19-2008, 02:58 AM
performance and sound is my goal right now too...I got the performance down so far but no sound as of yet :(

audioholic
01-19-2008, 03:26 AM
idk my box weighs prob 80 and speakers 55 a piece, plus 1 2400 and kx2500. yea, but the car stock weighs 2900 lbs, so 400+ me 155 is like 3450 so still pretty light over allYour box for two xxx's weighs 80lbs? You sure about that? ;) If it does, its grossly undersized. 3/4" mdf weighs 100lbs a sheet. Just built two 4 cube boxes for xxx's today, 2.5 sheets. And xxx's weigh 69lbs each. Unless you mean the new xxx's, I dont remember their weight. Either way, no way your box is only 80lbs. Even if its trupan or Birch.

audiobahnuser18
01-19-2008, 03:46 AM
Very nice man . very very nice. Gonna look real nice once it's done:D.keep us updated.

Polecat
01-19-2008, 03:59 PM
very nice, what's final compression, and LSA with that cam? Dual springs, good to .700 lift and only having .542 and 224@.050, will that be too much seat pressure?

15nissen
01-19-2008, 04:05 PM
Hey thats my hobby too. More of a chevy guy though.......


988 hp @ 6700, bunch of TQ as well, just dont remember the exact # on a tough dyno as well.

http://i50.photobucket.com/albums/f339/dja4260/100_2461.jpg
http://i50.photobucket.com/albums/f339/dja4260/Picture216.jpg

hurricanes0688
01-19-2008, 04:58 PM
ha your a bastard i can only dream of an engine like that although it wont be to streetable, my dads got a boat with a 454 and 400 hp its a chapparall villian 3 I can only imagine what that thing is gonna do on the water, hope u dont hit a little swell flying in that thing...

Polecat
01-19-2008, 05:01 PM
I'm a chevy guy too, but Ford 302's are bulletproof....

15nissen
01-20-2008, 02:18 PM
ha your a bastard i can only dream of an engine like that although it wont be to streetable, my dads got a boat with a 454 and 400 hp its a chapparall villian 3 I can only imagine what that thing is gonna do on the water, hope u dont hit a little swell flying in that thing...

we had a 24 foot chapparal with a small block. I loved that boat, actually grew up every weekend on it. Our current project is a 1/4 mile boat. No waves for us. Point and go that direction. It is a 8 second 1/4 mile boat on motor alone.

DBfan187
01-20-2008, 02:22 PM
I test water, sell chemicals, and sometimes clean chaparral/robalo's test pool for their boats.

hurricanes0688
01-20-2008, 04:14 PM
8 sec boat...taht would be scary on water lol let alone in a car, but yea i give you props for that boat def looks real nice. Maybe when i get a little older i was lookin into gettin a checkmate but i have no where to keep it right now

SilverSquared
01-20-2008, 04:17 PM
I dont think 12s will be a problem with ur build. Looks VERY promising to me. What gears are u going to have in the rear?

hurricanes0688
01-20-2008, 09:47 PM
I have 3.73's in the back

FineLinePimpin
01-25-2008, 02:13 PM
i would have went with a custom cam myself, but the TFS St.2 is a good one. What kinda chassis/suspension mods do you have. Post pics and vids of it when its all done.

hurricanes0688
02-05-2008, 12:50 AM
http://i25.tinypic.com/eqqow0.jpg

got a different intake with bigger 2.05's its ported so its better then that cobra by .10 which is gonna help out a lot also got the black trickflow valve covers to match with the word polished exactly like the intake prob putting it in in a couple of days....

Ignatowski
02-05-2008, 07:56 AM
come get some biches


AL615,3 foggers,bigcheifs

http://img.photobucket.com/albums/v328/excelerater/Malibu/PIC_0007.jpg

Yeah Toast
02-05-2008, 08:17 AM
Im building a 347 stroker twin turbo. once i get the block back from the builders ill post some pics of it. Boss block (yeah weak i know) eagle forge rotating assembly minus pistons, and zero balanced. Srp forged aluminum pistons (dished). afr 205's with 72cc. Trying for a 9.5:1. Looking to make upwards of 800hp with small shot on pump gas. Tko 600 modified by MMR to there 900 series and a good old ford 9 out back. Btw this will be in a fox body of course. ftl this car will be held together by my hopes and dreams.

brywatz
02-05-2008, 10:01 AM
Thats great Korey, (hurricanes0688) good to see your back on your feet moneywise. I guess you built that motor with the $2100.00 you scammed me out of on mustangforums.com back in November. I guess you dont have the money problems you said you had back on Dec12, when you told me you'd send my $2100.00 back. Its weird how you havent answered your phone since then. It must feel real good to tell everyone on here your big plans and the motor you worked so hard for by ripping me off. Hope everyone knows not to trust this guy -----I'll be in touch Bryan

04_edge
02-05-2008, 10:05 AM
Thats great Korey, (hurricanes0688) good to see your back on your feet moneywise. I guess you built that motor with the $2100.00 you scammed me out of on mustangforums.com back in November. I guess you dont have the money problems you said you had back on Dec12, when you told me you'd send my $2100.00 back. Its weird how you havent answered your phone since then. It must feel real good to tell everyone on here your big plans and the motor you worked so hard for by ripping me off. Hope everyone knows not to trust this guy -----I'll be in touch Bryan

fvckin pwnd.
:crap:

15nissen
02-05-2008, 12:32 PM
Im building a 347 stroker twin turbo. once i get the block back from the builders ill post some pics of it. Boss block (yeah weak i know) eagle forge rotating assembly minus pistons, and zero balanced. Srp forged aluminum pistons (dished). afr 205's with 72cc. Trying for a 9.5:1. Looking to make upwards of 800hp with small shot on pump gas. Tko 600 modified by MMR to there 900 series and a good old ford 9 out back. Btw this will be in a fox body of course. ftl this car will be held together by my hopes and dreams.


why such a cheap rotating assembly? Srp pistons are off the shelf pistons and your

going to put a bunch of boost to it? I smell diaster in your short future and or a rod

kicking out, hopefully through the pan.

hurricanes0688
02-07-2008, 10:56 PM
yea too bad i had all those parts and the supercharger i sold you at once , sold the supercharger instead of selling the top end because my stock block couldnt take all the power...def didnt scam you the supercharger you got can be found on the internet for 2000+ so please...if you wanna see the reciepts i bought the heads and everything else back in nov 2006...and traded my cobra intake manifold for a trickflow...

brywatz
02-09-2008, 05:38 PM
Korey, you have to be kidding, So, advertising that you are selling a Paxton NOVI 2000 to me for $2100.00 and then sending me a Paxton sn2000 (which was discontinued in 2001 and is not worth anywhere near $2000.00) Isn't scamming me? If I wanted an SN2000 I would have bought one. So your saying " Im advertising a BMW, but I'm gonna send you a Hyundai" No, thats not scamming anyone.
Maybe you don't remember sending me this E-mail response after I told you It was the wrong supercharger: (by the way everyone, this is the only conversation I've been able to have with him since this E-mail on Dec 12th because he won't answer his phone. BE A MAN KOREY AND DO THE RIGHT THING!






Inbox
From: hurricanes0688 Add Member To Contact List
To: brywatz
Date: 12/12/2007 12:46:59 PM
Subject: RE: TRACKING NUMBER??

Well i was trying to figure out on how i got that sn2000, i was misinformed when i first got it, and was told it was a paxton 2000 and was told it was the same as the sn. Only sn i thought that didnt put out much boost was the sn95. The thing is i dont know how im going to get you the money back asap. I used the money to pay court costs and stuff when i got in trouble 2 weeks ago. Like i said i am really sry for this whole thing. Please hold on to the supercharger until i get your money back. Im trying my best here. I am talking to the company where i bought it from and seeing if can get a full refund. The supercharger i dont understand why u said it was 11 years old it is brand new or maybe u meant it was just outdated. You can get 12lbs of boost outta that is what i was reading but in my emails with the guy i was told i could swap pulleys and get a good 16lbs outta that and now reading what u said i think tahts some total ****. Belive i was not out to get anyone with this. I myself belived that it was the 2000 and didnt even realize it was an sn2000. So ill pm you in a couple days and try and find something out