PDA

View Full Version : need specs for a box



Big_Mark1884
04-11-2003, 11:10 AM
hello all,
i need some help i just bought a pair of pioneer premeir 12's 4 ohm DVC 2000 watts max and i was wondering on what what type of box i should use. i am putting them in an astro van but need some help with the box for hella bass i am thinking ported is the way to go but realy dont know. help please!!!!

oh and i am running 2 rockford fosgate 1200 watts max to each one bridged.




thanks a lot for the help

TaZz
04-12-2003, 01:00 AM
k first, what are u looking for, big bass (hard) or loud bass that u can here from a few blocks?:eek:

Big_Mark1884
04-14-2003, 01:54 PM
well i would like it to be a little in between but if it has to be one or the other ...... probbly hard bass ...

Randy Savage
04-14-2003, 01:55 PM
First off, ignore the MAX ratings....they mean nothing...what is the RMS on the subs and the amps?

If you want 'hard bass', then you gotta go ported.

Big_Mark1884
04-14-2003, 01:59 PM
well the speakers are rated at 750 rms and the amps are rated at 550 or 650 i am not to sure about those.

Randy Savage
04-14-2003, 02:01 PM
Originally posted by Big_Mark1884
well the speakers are rated at 750 rms and the amps are rated at 550 or 650 i am not to sure about those. Ok, happen to have the T/S params of the subs?

Also, what are the dimensions you have to work with?

And what are you looking for, a nice low end, or more SPL and a higher peak?

Big_Mark1884
04-14-2003, 02:15 PM
the room i am working with is 4' 5.5'' w 1' 4''d and height is 3' 7''

tell you the truth i realy dont know.... wich ever would be better i guess


:confused: