PDA

View Full Version : Fisher Customs FTMFW



DB_DRAG_SPL
01-07-2008, 02:00 PM
Thanks Dylan and BJ! Can't wait to see the finished product! Finished product will probably have the Fisher Customs logo CNC machined on the plexi window and will be backlit by white LED's

http://i228.photobucket.com/albums/ee174/kirbycamry/ssd1.png
http://i228.photobucket.com/albums/ee174/kirbycamry/ssd2.png
http://i228.photobucket.com/albums/ee174/kirbycamry/ssd3.png
http://i228.photobucket.com/albums/ee174/kirbycamry/ssd4.png
http://i228.photobucket.com/albums/ee174/kirbycamry/ssd5.png

BuckyBoy
01-07-2008, 02:06 PM
That's awesome. Very creative. Can't wait to see the build log.

revrider1
01-07-2008, 02:09 PM
Thats gonna be nice

JBLCAMRY
01-07-2008, 02:24 PM
will be a sweet build for sure

WhoSayWho?
01-07-2008, 02:25 PM
JBLCAMRY = Dylan??

TylerBD12
01-07-2008, 02:26 PM
BJ always does top notch work. Cant wait to see the finished outcome!

negative_camber
01-07-2008, 02:38 PM
JBLCAMRY = Dylan??

Yes.

negative_camber
01-07-2008, 02:39 PM
Looks like a nice box, looking forward to build pics. What's going in it?

Pl8er
01-07-2008, 02:45 PM
Fisher boxes are top notch. Looking at the prices yesterday, I'm going to get one made before they really blow up and the prices get too high.

They charge far less than the excellence they put into them.

bjfish11
01-07-2008, 04:28 PM
Dylan, that is just SICK..... PERIOD!

Gonna check on the CNC part, shouldnt be a problem though. :)

DB_DRAG_SPL
01-07-2008, 04:31 PM
Dylan, that is just SICK..... PERIOD!

Gonna check on the CNC part, shouldnt be a problem though. :)

Sounds good BJ, I figure since the Fi logo is sitting low on the brace/in the window. You could CNC your company logo or whatever you wanted to on the top portion of the plexi window as big as you want to make it! I gotta give the geniuses that are making this box all the props that I can!

stuckinok
01-07-2008, 04:50 PM
*** Pure ***....

WhoSayWho?
01-07-2008, 04:58 PM
I don't know, I bought a box from BJ and when it arrived it was filled with live kittens.



But it was a very well built box:D

PatFitz9
01-07-2008, 05:03 PM
I don't know, I bought a box from BJ and when it arrived it was filled with live kittens.



But it was a very well built box:D

:fyi: kittens add deebeez

WhoSayWho?
01-07-2008, 05:05 PM
Indeed. But in all seriousness, he does good work and, in my experience, gets the box out when he said he would.

JBLCAMRY
01-07-2008, 06:09 PM
JBLCAMRY = Dylan??
Thats what they call me





:fyi: kittens add deebeez

about 1.34db per kitten........ well thats what the math works out to:laugh:

basshedz06
01-07-2008, 06:10 PM
dude this box is uber bad *** love the fi logo inside the box and the looke of it man u guys do killer work wish i was as half as good with sketch as u guy's are

Beefy
01-07-2008, 06:11 PM
woah.


i think that pritty much sums it up^

DownSouth954
01-07-2008, 06:11 PM
Looks awesome

DB_DRAG_SPL
01-07-2008, 06:18 PM
:fyi: kittens add deebeez

At least 10db @ the kick!

JBLCAMRY
01-07-2008, 06:41 PM
At least 10db @ the kick!

only with 7.46268656716417914477611940 kittens:p:

DB_DRAG_SPL
01-07-2008, 07:29 PM
:crap:
only with 7.46268656716417914477611940 kittens:p:

:goodbad:

JBLCAMRY
01-07-2008, 08:12 PM
want more pics? They now have the logo on the on the plexi....... and a little surprise.............:crazy:

bjfish11
01-07-2008, 08:16 PM
yes please... And Dylan, hop on AIM if you got the time...

JBLCAMRY
01-07-2008, 08:19 PM
http://i228.photobucket.com/albums/ee174/kirbycamry/ssdbox1.png

http://i228.photobucket.com/albums/ee174/kirbycamry/ssdbox2.png

http://i228.photobucket.com/albums/ee174/kirbycamry/ssdbox3.png

http://i228.photobucket.com/albums/ee174/kirbycamry/ssdbox4.png

http://i228.photobucket.com/albums/ee174/kirbycamry/ssdbox5.png

bjfish11
01-07-2008, 08:21 PM
very VERY nice man. Im excited about this one!

~Magick_Man~
01-07-2008, 08:27 PM
Are you going to have the whole brace cnc cut?
Or just the FI logo and incorporate it by hand.
Looks bad *** regardless.

~Magick_Man~

bjfish11
01-07-2008, 08:30 PM
Most like Ill had cut the brace, and just have the plexi CNC'ed...

ultimate157
01-07-2008, 08:42 PM
Just a quick observation. Will you have issues with the cross-brace being that close to the pole vent?

Excellent design and will be looking forward to the build log ;)

evilkokonut
01-07-2008, 10:01 PM
how much is this box costing you?

JBLCAMRY
01-07-2008, 10:17 PM
Just a quick observation. Will you have issues with the cross-brace being that close to the pole vent?

Excellent design and will be looking forward to the build log ;)

there should be no problems at all with this, in the final design i may move that piece under the motor down a hair or too though.

IonSQL
01-07-2008, 10:19 PM
Wow, that's awesome Dylan. Can't wait to see this one play out...

JBLCAMRY
01-07-2008, 10:21 PM
Wow, that's awesome Kirby. Can't wait to see this one play out...

Thank you sir......... and i had fun making it......:fyi:

IonSQL
01-07-2008, 10:22 PM
I bet :)

BobbyDD
01-07-2008, 10:44 PM
Nice box, but in my opinion your fc logo would look much better more discreet in a corner of the plexi. But if that's what the buyer wants then I understand that. Your boxes always end up awesome though.

DB_DRAG_SPL
01-07-2008, 11:02 PM
Dylan, if you talk to BJ before I do, have him PM me.

JBLCAMRY
01-07-2008, 11:04 PM
Dylan, if you talk to BJ before I do, have him PM me.

ok:D

SkatinBassPLaya
01-07-2008, 11:42 PM
alright,

I have decided I want to get a Fisher enclosure.

how do i proceed?

BobbyDD
01-07-2008, 11:44 PM
alright,

I have decided I want to get a Fisher enclosure.

how do i proceed?

pm him?

SkatinBassPLaya
01-07-2008, 11:44 PM
i did before he said contact his designer first, i lost the email

tommyk90
01-07-2008, 11:47 PM
I don't know about anybody else, but I'm worried about those little end pieces of the logo breaking off during full tilt music playing. There's a lot of pressure that builds up inside a box.

Just a concern.

BobbyDD
01-07-2008, 11:49 PM
i did before he said contact his designer first, i lost the email

I believe he was probably talking about ionsql on this same page, but I'm not sure.

DB_DRAG_SPL
01-07-2008, 11:53 PM
alright,

I have decided I want to get a Fisher enclosure.

how do i proceed?

e-mail [email protected]

BobbyDD
01-07-2008, 11:55 PM
e-mail [email protected]

I stand corrected. Sorry.

SkatinBassPLaya
01-07-2008, 11:55 PM
thanks

btdickey99
01-08-2008, 12:02 AM
**** the Fi logo gives me an idea for my box...maybe I should ask for it!!!!!!

Excited about him building mine

bjfish11
01-08-2008, 12:16 PM
I don't know about anybody else, but I'm worried about those little end pieces of the logo breaking off during full tilt music playing. There's a lot of pressure that builds up inside a box.

Just a concern.

Well here is my take on it.. maybe Im wrong... But wouldnt the pressure inside be pretty even? As in equal pressure on all sides of the pieces? Therefore, theorhetically it shouldnt break. Plus those pieces wont be very long, so it shouldnt be a concern...

WhoSayWho?
01-08-2008, 12:17 PM
Well here is my take on it.. maybe Im wrong... But wouldnt the pressure inside be pretty even? As in equal pressure on all sides of the pieces? Therefore, theorhetically it shouldnt break. Plus those pieces wont be very long, so it shouldnt be a concern...

Do you want your kittens back?

bjfish11
01-08-2008, 12:19 PM
Do you want your kittens back?

Ill let you keep those... I bred some more... so im good. Thanks for asking though... :laugh:

SPL140.2
01-08-2008, 12:20 PM
etched glass vinyl would work and be hella easier :D

egg

bjfish11
01-08-2008, 12:22 PM
etched glass vinyl would work and be hella easier :D

egg

You do vinyl work correct? Because I will be needing some more little vinyls for my badges before too long.

And the reason we are going CNC is so it can be backlit... plus I want to try it out... LOL

tapout
01-08-2008, 12:23 PM
I can dig it.

bjfish11
01-08-2008, 12:23 PM
I can dig it.

I was waiting for your approval ;)

WhoSayWho?
01-08-2008, 12:24 PM
Ill let you keep those... I bred some more... so im good. Thanks for asking though... :laugh:

So, I am not good enough to go on your ref list?

Seriuosly though, sending you a pm about another box.

bjfish11
01-08-2008, 12:26 PM
So, I am not good enough to go on your ref list?

Seriuosly though, sending you a pm about another box.

LOL, I havent updated my ref list in like a year. It was getting too long...

I should just delete it all together....

audiobahnuser18
01-08-2008, 12:31 PM
BJ that is gonna be one real nice box once it's done . As usual man very nice work.

ZEUSGT
01-08-2008, 12:42 PM
Oh my gosh... that box is awesome....

ultimate157
01-08-2008, 01:36 PM
Well here is my take on it.. maybe Im wrong... But wouldnt the pressure inside be pretty even? As in equal pressure on all sides of the pieces? Therefore, theorhetically it shouldnt break. Plus those pieces wont be very long, so it shouldnt be a concern...

You are correct; Along those lines, a vented enclosure will have much less pressure than a sealed one. The only thing that I would worry about to cause the failure of those pieces would be vibrations. Even then they aren't too thing/long to worry about.

Then again only time will tell. :)

tommyk90
01-08-2008, 01:40 PM
Well here is my take on it.. maybe Im wrong... But wouldnt the pressure inside be pretty even? As in equal pressure on all sides of the pieces? Therefore, theorhetically it shouldnt break. Plus those pieces wont be very long, so it shouldnt be a concern...

But the pressure moves back and forth in the enclosure, causing those pieces to vibrate at a rapid rate.

Maybe I'm wrong, who knows. It was just something that I thought about.

THUMPPER
01-08-2008, 01:56 PM
I did an enclosure with a rotating CD inside....
you could see the CD move when the subs were at full
tilt....the MDF cut out logo would be wayyy sturdier
and wouldn't be an issue

nice design.....that C&C is the **** for making shapes

tommyk90
01-08-2008, 01:58 PM
I did an enclosure with a rotating CD inside....
you could see the CD move when the subs were at full
tilt....the MDF cut out logo would be wayyy sturdier
and wouldn't be an issue

nice design.....that C&C is the **** for making shapes

Was this enclosure for 2 15's and a couple thousand watts? Ported or sealed? How much port area?

bjfish11
01-08-2008, 06:49 PM
But the pressure moves back and forth in the enclosure, causing those pieces to vibrate at a rapid rate.

Maybe I'm wrong, who knows. It was just something that I thought about.


Gotcha, yea its really hard to tell whats going to happen. I think it will be sturdy enough pieces.... but yea, only one way to find out... lol


I did an enclosure with a rotating CD inside....
you could see the CD move when the subs were at full
tilt....the MDF cut out logo would be wayyy sturdier
and wouldn't be an issue

nice design.....that C&C is the **** for making shapes

Sounds like an interesting box. Do you have any pics?

DB_DRAG_SPL
01-08-2008, 07:52 PM
Gotcha, yea its really hard to tell whats going to happen. I think it will be sturdy enough pieces.... but yea, only one way to find out... lol

It'll be plenty sturdy. Hell if she does break then no worries, we'll do something different the next time. I'm psyched about the enclosure and can't wait to get it started!!!

DB_DRAG_SPL
01-08-2008, 09:09 PM
Dylan, you have a PM

THUMPPER
01-08-2008, 10:16 PM
Sounds like an interesting box. Do you have any pics?

I wish..this was back when CD's first came out...and before I
got the digi cam..it was just a CD turning on an axle and the
interior of the box was all mirror surfaced with a little multi color
spinner lite inside and a plexi window on the front and back
of the enclosure
it was seriously so close to being "Disco"- ish it was scarry
the owner of this system was a DJ of a popular night club
and it's what he wanted....:confused:

JBLCAMRY
01-09-2008, 12:23 AM
Design sent to BJ, can't wait..........................:D:D:D:D

DB_DRAG_SPL
01-09-2008, 01:03 AM
Design sent to BJ, can't wait..........................:D:D:D:D

w00t!:viking2:

bjfish11
01-09-2008, 10:02 AM
Ill have a quote for you tonight man, then.... its on! ;)

DB_DRAG_SPL
01-09-2008, 10:39 AM
thanks BJ.

Immacomputer
01-09-2008, 11:00 AM
You are correct; Along those lines, a vented enclosure will have much less pressure than a sealed one. The only thing that I would worry about to cause the failure of those pieces would be vibrations. Even then they aren't too thing/long to worry about.

Then again only time will tell. :)

That's not true. Ported enclosures have an extreme pressure build up around tuning. Far above tuning, the port actually acts like an open circuit or a big piece of wood and it doesn't move making the enclosure act (and pressurize) like a sealed enclosure.

I think the piece will probably be OK but there will be varying pressure like Tommy was saying and it will add stress and vibration to those pieces. I doubt they would break but it's possible.

DB_DRAG_SPL
01-09-2008, 12:07 PM
That's not true. Ported enclosures have an extreme pressure build up around tuning. Far above tuning, the port actually acts like an open circuit or a big piece of wood and it doesn't move making the enclosure act (and pressurize) like a sealed enclosure.

I think the piece will probably be OK but there will be varying pressure like Tommy was saying and it will add stress and vibration to those pieces. I doubt they would break but it's possible.

Anything's possible, but I really don't think it'll break, there's not a WHOLE lot of exposed pieces from the brace, so it should hold up great.

DB_DRAG_SPL
01-09-2008, 06:46 PM
Ill have a quote for you tonight man, then.... its on! ;)

:woot:

ultimate157
01-09-2008, 07:33 PM
That's not true. Ported enclosures have an extreme pressure build up around tuning. Far above tuning, the port actually acts like an open circuit or a big piece of wood and it doesn't move making the enclosure act (and pressurize) like a sealed enclosure.

I think the piece will probably be OK but there will be varying pressure like Tommy was saying and it will add stress and vibration to those pieces. I doubt they would break but it's possible.

I stand corrected. :) Thanks for the info.

na_rsx
01-09-2008, 09:00 PM
you get my pm BJ

DB_DRAG_SPL
01-09-2008, 09:51 PM
Ill have a quote for you tonight man, then.... its on! ;)

Any word yet BJ?

bjfish11
01-09-2008, 09:54 PM
Any word yet BJ?

Working on it as we speak. Put in a late night in the shop. The last week, I have been getting VERY busy.... :D

DB_DRAG_SPL
01-09-2008, 09:55 PM
Working on it as we speak. Put in a late night in the shop. The last week, I have been getting VERY busy.... :D

Sounds good, hey can't beat steady business!

AJē06
01-09-2008, 09:56 PM
Fisher boxes are top notch. Looking at the prices yesterday, I'm going to get one made before they really blow up and the prices get too high.

They charge far less than the excellence they put into them.

x2

bjfish11
01-09-2008, 10:22 PM
Thanks fellas. This project will be beginning pretty soon ;)

BreakDaLaw
01-09-2008, 10:24 PM
yea i ordered my box...it comes in tomorrow im so excited to put it in my car and as soon as some of my friends see it they willl/may put in a order too!!

http://i13.tinypic.com/6z9jv2u.jpg

DB_DRAG_SPL
01-09-2008, 10:29 PM
Payment will be sent tonight! Look for the build log in the VERY near future!!!!!

bjfish11
01-09-2008, 10:31 PM
Payment will be sent tonight! Look for the build log in the VERY near future!!!!!

:woot:

JBLCAMRY
01-09-2008, 10:47 PM
:woot:

How did you like the brace ?........ lol:D

DB_DRAG_SPL
01-09-2008, 11:51 PM
Payment sent BJ!!!! Thanks again for the design work Dylan! Awesome work!

DB_DRAG_SPL
01-10-2008, 02:25 PM
Wh00t. Everything's paid for, BJ's just got to get ahold of the CNC guy and then its on like donkey kong!! Build log to come very soon!!

stuckinok
01-10-2008, 02:29 PM
I am all excited like its my box or something LOL I cant wait to see this loud liberty build.

bjfish11
01-10-2008, 02:40 PM
Wh00t. Everything's paid for, BJ's just got to get ahold of the CNC guy and then its on like donkey kong!! Build log to come very soon!!

Hopefully I will catch him today... might just have the brace done on the CNC while im at it...

DB_DRAG_SPL
01-10-2008, 08:13 PM
Hopefully I will catch him today... might just have the brace done on the CNC while im at it...

Sounds good!!!!:D

DB_DRAG_SPL
01-10-2008, 10:14 PM
:handclap:

bjfish11
01-11-2008, 10:02 AM
Yesterday, I got the ok on the engraving for the logo.... Hopefully this weekend, Ill get going on this box ;)

DB_DRAG_SPL
01-11-2008, 10:04 AM
Yesterday, I got the ok on the engraving for the logo.... Hopefully this weekend, Ill get going on this box ;)

Awesome

bjfish11
01-11-2008, 10:07 AM
Awesome

Im pumped I dont have to work this weekend, should be able to put some good amount of time into this one, and that elephant box.

DB_DRAG_SPL
01-11-2008, 10:16 AM
Im pumped I dont have to work this weekend, should be able to put some good amount of time into this one, and that elephant box.

:2thumbs:

DB_DRAG_SPL
01-13-2008, 07:59 PM
Im pumped I dont have to work this weekend, should be able to put some good amount of time into this one, and that elephant box.

:peace: Can't wait to see if BJ made any progress on it this weekend!!!:peace:

JBLCAMRY
01-13-2008, 08:00 PM
:peace: Can't wait to see if BJ made any progress on it this weekend!!!:peace:

me 2:D:D

DB_DRAG_SPL
01-13-2008, 08:02 PM
He hasn't been online since the 11th, so hopefully he's been holed up in the shop working on it and the elephant box!

nineballsafety8
01-13-2008, 09:23 PM
for sure.... between the 2 of us, we made him pretty busy this weekend LOL
im excited to see both of them!!!

DB_DRAG_SPL
01-13-2008, 09:29 PM
for sure.... between the 2 of us, we made him pretty busy this weekend LOL
im excited to see both of them!!!


x2!!!! He also said he had a few other projets on the table, so i'm sure he's been **** busy!

That elephant box is going to be a **** MONSTER!

tapout
01-13-2008, 09:32 PM
Sorry guys, I spoke with him an hour ago and he said he was busy with my box these last 2 days.

Maybe he can start on yours tomorrow.

mobeious
01-13-2008, 09:41 PM
lol pwnd

DB_DRAG_SPL
01-13-2008, 09:47 PM
lol pwnd

Not so much, I knew BJ was backed up and told him to get to it when he could, i'm in no hurry, masterpieces take time.

btdickey99
01-13-2008, 09:50 PM
x2!!!! He also said he had a few other projets on the table, so i'm sure he's been **** busy!

That elephant box is going to be a **** MONSTER!

Mine is one, and will start tomorrow....


Or whenever he has a chance to start

mobeious
01-13-2008, 09:56 PM
ya BJ makes some nice boxes,, i wish i was as busy as him

nineballsafety8
01-13-2008, 10:34 PM
lol... busy, yeah you could say that... but again you cant rush perfection... good things come to those who wait

bjfish11
01-14-2008, 09:28 PM
In case anyone wants to follow the build....
http://www.caraudio.com/forum/showthread.php?t=284556