PDA

View Full Version : Help with box design 07 Silverado



agrant
01-06-2008, 09:08 PM
I need help with box design for an 07 New Body Style Silverado ext cab. I need a box that will fit under the rear seat. Box needs to be .60 cuft. Sub will ED 11kv2 10". Thanks for any help!!

BuckyBoy
01-06-2008, 09:24 PM
Some dimensions would help...

agrant
01-06-2008, 09:34 PM
It is a pretty small space.....cut up alot unless you go over the hump of the truck and it is at an angle.....dimensions are 6.5 inches deep 15 inches long and 11 inches wide.....thanks alot

Worlddre
01-06-2008, 09:45 PM
if its sealed tkae you max dimensions and build around around those tis not so hard.

15 * 11 * 6.5 externally yields 13.5 * 9.5 * 5

thuse using .75 in wood would be about .4ft3 before driver displacement

with such small panels you could probably get away with using .5in wood.

15 * 11 *6.5 yields 14 * 10 * 5.5

that would be about .44ft3