PDA

View Full Version : Box for Soundsplinter RL-S, Need Design Please!



mike11202
01-04-2008, 02:24 PM
It's coming in on Tuesday so I plan on making the box this weekend. Could anybody design a box for me? I'd appretiate it.

Just a standard Sealed Box for a 07 Honda Civic Coupe. 2-3 cu. ft.

Max Dimensions: 32 width x 16 height x 16 depth

Single 3 Ohm Measurements

Qts: 0.970
Qes: 1.114
Qms: 7.459
Fs: 30.97 Hz
Re: 2.88 Ohm
Ls: 2.54 mH
Rp: 3.15
Vas: 27.65 L
Mms: 344.2 g
Cms: 76.69 u
Bl: 13.15 T*m
SPL: 80.5 dB
Sd: 0.0507 m^2
Xmax: 38.5 mm

Displacement: 0.19 cu ft
Mounting Depth: 21.2 cm
Total Depth: 23.3 cm
Outside Diameter: 32.3 cm
Weight: 44 lbs
Magnet Width: 18.8 cm
Mounting Cutout: 28.2 cm

80INCHES
01-04-2008, 02:51 PM
2-3cubes is small
80

jellyfish420
01-04-2008, 05:20 PM
i had a rl-s 12 to play w/ for a while... and i ran it in a 7 cube sealed box ;)

mike11202
01-04-2008, 07:15 PM
Well since I have a trunk should I just run it IB?

60ndown
01-04-2008, 08:26 PM
Well since I have a trunk should I just run it IB?

that would be sweet