PDA

View Full Version : aeroport help



BASS_WARRIOR
01-04-2008, 01:33 PM
Im looking at build a new box for my SE and I was wondering what the advantages/dis-advantages of using a 3" areoport compared to ones with a bigger diameter. I ask because using the calculator on the PSP website a 3" is the biggest I can use because of the length it would have to be. Any advice would help:D

mapolley07
01-04-2008, 01:35 PM
bigger diameter will reduce port noise, but most likely will require a much longer port length

BASS_WARRIOR
01-04-2008, 01:37 PM
So is there anyway around the port noise issue? Or is it just a fact of life? lol

mile098
01-04-2008, 02:02 PM
its a fact of life...the bigger the port lesser the noise but requires length...why not use pvc pipes and if u cant put them in the box full length, make a 'chimney'...wont look much but they are cheap as hell and u wont feel bad cutting them, experimenting with the lengths till u hit the jackpot...

IgnoreMe
01-04-2008, 02:05 PM
what size box is this and what tuning? what size sub?

enclosure volume, tuning, and port area, all help determine how long the port will need to be. if you can sacrifice a little higher tuning or add a little more volume, you might be able to get away with it.

thegreatestpenn
01-04-2008, 02:05 PM
you could build a flared slot port box, but that's a little bit harder

BASS_WARRIOR
01-04-2008, 02:26 PM
Its a 10" SE and the volume would be around 1.3cft after displacement. tuning would be at 34hz. The volume and tuning I'm getting off of the RE site.

BASS_WARRIOR
01-04-2008, 05:38 PM
bump :)

BASS_WARRIOR
01-04-2008, 10:20 PM
anybody?

Lakota
01-04-2008, 11:13 PM
Do an external port:)

BASS_WARRIOR
01-05-2008, 08:03 PM
Do an external port:)

Thats still a long *** external port lol

Lakota
01-06-2008, 12:26 AM
Thats still a long *** external port lol

External works well, it's the only way that I build boxes now:)

tcguy85
01-06-2008, 03:03 PM
how much xmax does the sub have and how much power will it be given?

you might be able to get away with a 3 inch port with both ends flared.

i have my Dayton ten in a ported box with a 3 inch port with a flare on each end and i don't have any port noise.

the port is still half external though.