View Full Version : Need help designing a box
12-29-2007, 05:31 PM
Im wanting to build a new box for my 18" BL's. They are currently in a buddies box(that was built for these subs as well), and would like to get my own box build going. This will be going in the back of my 1999 suburban. I want the subs up, port back, but the trick is, i wanna try aero ports this time around. I have no experience at all using, or designing a box for aero ports, and ANY help would be greatly appreciated....pm me please with any suggestions...thanks alot, and happy new year, Ed
12-29-2007, 11:19 PM
12-30-2007, 12:08 AM
what size box is recomended for them? i just did a 6 net with 2x 6 inch aeros tuned to low 30s sounds way better then a slot port , atleast to me..... id go with 4 6's tho..........
12-30-2007, 08:50 PM
the ported requirements per there website says......[email protected]
12-30-2007, 09:02 PM
yunvme, if your box was for 1 how long did you do the ports?
12-30-2007, 09:10 PM
and put your width deminsions up on here.
and how tall you want it more or less.
dont worry about the depth, its a burban... :)
12-30-2007, 09:34 PM
you can try what im tryin if you really want , itld fit a burban better anyways its bigger and ya might be able to just fit 2 in there......
12-30-2007, 09:41 PM
If you're going with 2 18s you're going to want around 13 cubes net with a little over 200 square inches of port. Since you're going to use aero ports, you can get away with less port area apparently, so I would say around 150 sq in of port, or 5 6" areo ports. To calculate the length of aero port needed to achieve tuning in a certain box, use this site:
12-30-2007, 10:31 PM
i told him about 14 net minimum for both ,in a pm when he asked..... so i guess its a good start, i still say 4x 6's should do tho ..........
12-30-2007, 10:55 PM
thanks for the help guys.....now probably with a little help from a friend of mine..lol, we can make summin outta this. Thanks for the link btw Seandub.
01-01-2008, 11:57 PM
01-02-2008, 09:23 AM
you still need help?
i think were done. find where your gonna buy ports... :)