PDA

View Full Version : Bedlining a box...



chambiec1
12-27-2007, 10:48 PM
What's up guys. I am going to be building my box this weekend, and was looking for an alternate way to cover the box. I picked up a quart of Duraliner roll-on bedliner in black. I was wondering if anyone could point me in the right direction to find a how to, or write up on bedlining my box. It's just going to be a simple box built with MDF, but I would like a nice durable finish since I use my tunk alot.
Any help is appreciated.
-Casey

Ignatowski
12-28-2007, 07:31 AM
bedliner is worth 3db

MemphisCherokee
12-28-2007, 02:11 PM
haaaaaaaaaa, funny stuff right there ^

chambiec1
12-28-2007, 05:50 PM
bedliner is worth 3db

Thanks for the "helpful" post... but isn't it deeeeebeeeezzzzzz? ;)

Just kidding.

But I guess basically what I want to know is how to prep the box for the liner... should I just sand with a rough grit sandpaper and then roll it on, or should I use a primer?

JimJ
12-28-2007, 05:51 PM
I would prime it.

wojo
01-06-2008, 10:16 PM
you dont need primer. the MDF will soak in the bedliner a bit just like if you were to paint it. just do a couple coats. ull be alright

BuckyBoy
01-06-2008, 10:19 PM
you dont need primer. the MDF will soak in the bedliner a bit just like if you were to paint it. just do a couple coats. ull be alright
Painted MDF looks like **** unless your primed it.
Idk about bedliner. I would probably prime it just to be safe.