PDA

View Full Version : Box design... Would be really great...



miker
12-20-2007, 04:03 PM
Alright... I can build a box just I have all the tools needed etc... I just need a design!

I now see why design is so important... From my mishap, so thats like 30$ and a few hours wasted...

I'm not really sure how to ask.. But I need a good design for 2 12" type R's... With limited space...

As for dimensions Here is What I know I have to work with...
Hight- 14.5
depth- 19
width- 34 (could be 1 or 2 inches more, I have to double check)

I wouldn't be asking, buy it seems some people just make up designs for fun.;)

Thanks.

BuckyBoy
12-20-2007, 09:03 PM
Alright... I can build a box just I have all the tools needed etc... I just need a design!

I now see why design is so important... From my mishap, so thats like 30$ and a few hours wasted...

I'm not really sure how to ask.. But I need a good design for 2 12" type R's... With limited space...

As for dimensions Here is What I know I have to work with...
Hight- 14.5
depth- 19
width- 34 (could be 1 or 2 inches more, I have to double check)

I wouldn't be asking, buy it seems some people just make up designs for fun.;)

Thanks.
You want them in separate chambers with a slot port on each side? Or just one port?

miker
12-20-2007, 09:33 PM
You want them in separate chambers with a slot port on each side? Or just one port?

Well, thats what I don't know! i'm not a box designer, I don't know where to begin, lol, well kinda

miker
12-20-2007, 09:34 PM
You want them in separate chambers with a slot port on each side? Or just one port?

That might take up more room though too

BuckyBoy
12-20-2007, 10:18 PM
http://i233.photobucket.com/albums/ee141/smithgt/2230.jpg
2.2ft^3 @ 30Hz
34x14.5x19
Port- 2.5x13
Port Length- 37.5
Port Area- 32.5

miker
12-20-2007, 10:20 PM
Hmm I have been told I need more area... thats not 2.2 ft per sub is it? Maybe I could get a bigger box in there.. subs facing up?

BuckyBoy
12-20-2007, 10:24 PM
Hmm I have been told I need more area... thats not 2.2 ft per sub is it? Maybe I could get a bigger box in there.. subs facing up?
Thats 2.2 all together. I finally got the Alpine website to load for me. I thought I remembered it calling for 1.2ft^3, but now I see it is 1.7
I will fix it. How much are you wanting? 3-3.5 somewhere in there?

miker
12-20-2007, 10:26 PM
4+

BuckyBoy
12-20-2007, 10:29 PM
4+
You aren't gonna get 4+ with those dimensions.

miker
12-20-2007, 10:30 PM
yeah.. i know..
I could fit something longer thoug if it were shorter..
It could be 12.5 inches high with the subs poointing up...

BuckyBoy
12-20-2007, 10:32 PM
yeah.. i know..
I could fit something longer thoug if it were shorter..
It could be 12.5 inches high with the subs poointing up...
hmm... how much longer?
could you get more depth?

miker
12-20-2007, 10:34 PM
I have like 36in..
Let me go measure.

miker
12-20-2007, 10:40 PM
35" wide towards the back of the trunk. 40" wide in the front area.
34" deep

miker
12-20-2007, 10:41 PM
I just need to know if it will be able to slide in depending on how long/ tall I make it...

The 35" is only for 11", the other 23 I have 40" to work with...

BuckyBoy
12-20-2007, 10:52 PM
do you want a slot port on the side like in the first one or do you want a square port on the center of the bottom?

miker
12-20-2007, 10:57 PM
W/e works the best/ makes the most sense... for a box like this.

miker
12-20-2007, 10:57 PM
It could also port the the center seat..