PDA

View Full Version : mustang enclosure



mustangog2003
12-16-2007, 05:44 PM
Who makes an affordable enclosure for two 12s for a mustang? Ive seen a down firing one but does those sound good? Its a 2003 mustang GT.

UCF52
12-16-2007, 06:51 PM
BJFish (http://fishercustoms.com/index.html) or build your own

jagblazer01
12-16-2007, 06:55 PM
i had a sealed box w/ 3 JL 10w3s in it on a 500/1 amp in my 04 GT. Sounded very good.

bjfish11
12-16-2007, 06:59 PM
I did a box for a Mustang awhile back (I think), Ill see if I can dig it up...

bjfish11
12-16-2007, 07:06 PM
Cant find the pics :(

bjfish11
01-02-2008, 07:40 PM
Sorry to bump the old thread, but look what I just came across....

http://i171.photobucket.com/albums/u282/bjfish11/13w7-stang-1.jpg
http://i171.photobucket.com/albums/u282/bjfish11/TravisBrandy001-1.jpg
http://i171.photobucket.com/albums/u282/bjfish11/TravisBrandy002-1.jpg

BuckyBoy
01-02-2008, 07:44 PM
**** box.

bjfish11
01-02-2008, 08:06 PM
Thanks man. Its for a 13W7 BTW.

UCF52
01-02-2008, 11:25 PM
Thanks man. Its for a 13W7 BTW.

What year 'stang was that box for? I am just trying to picture it in the trunk and the enclosure angles don't seem to add up...

el rafa
01-02-2008, 11:33 PM
Looks like it's for an 05+.


IonSQL did my design.


http://i42.photobucket.com/albums/e307/raspucho25/rafamoddimfa3.jpg

http://i42.photobucket.com/albums/e307/raspucho25/DSC00012.jpg

UCF52
01-03-2008, 01:13 AM
Ah, gotcha. That would make sense. Thanks.

Kil4Thril
01-03-2008, 09:11 AM
Phil at Woodlawn does a design that works VERY well for the 94-04's. I helped a bit with it. Mine is/was the one listed on his site. I had 2 eD flat cone 10's, 1.5 at 32hz. The design could easily hold 3-10's or a pair of 12's. The Mach enclosure has to go, though.
http://www.woodlawncabinetry.com/Elemental_Design_Custom_Boxes.html

2nd one down.

JDBuilder
01-03-2008, 09:11 AM
Sorry to bump the old thread, but look what I just came across....

http://i171.photobucket.com/albums/u282/bjfish11/13w7-stang-1.jpg
http://i171.photobucket.com/albums/u282/bjfish11/TravisBrandy001-1.jpg
http://i171.photobucket.com/albums/u282/bjfish11/TravisBrandy002-1.jpg

Another fine build! looks good:).

Kil4Thril
01-03-2008, 09:12 AM
Phil at Woodlawn does a design that works VERY well for the 94-04's. I helped a bit with it. Mine is/was the one listed on his site. I had 2 eD flat cone 10's, 1.5 at 32hz. The design could easily hold 3-10's or a pair of 12's. The Mach enclosure has to go, though.
http://www.woodlawncabinetry.com/Elemental_Design_Custom_Boxes.html

2nd one down.


Another fine build! looks good:).

He builds one, also. I still have one that did hold 4-10's. Very solid enclosure, and right now it is used as a storage unit in my basement :D

Louisiana_CRX
01-03-2008, 09:21 AM
Another fine build! looks good:).

That one is nice but that one is for a 2005 and up Mustang...reason for odd shaped bottom...

truckstoy
01-03-2008, 09:24 AM
Sorry to bump the old thread, but look what I just came across....

http://i171.photobucket.com/albums/u282/bjfish11/13w7-stang-1.jpg
http://i171.photobucket.com/albums/u282/bjfish11/TravisBrandy001-1.jpg
http://i171.photobucket.com/albums/u282/bjfish11/TravisBrandy002-1.jpg

hey that's my box................:D

bjfish11
01-03-2008, 01:09 PM
hey that's my box................:D

Tis True. Any pics of it installed by chance?

djessenz
01-03-2008, 04:36 PM
bjfish11,

Would you be able to make a custom box for one 12" Kicker CVX ported @ 32hz that would fit right behind the seats of my 2002 ford mustang (non-convertible)? Please let me know! [email protected]

truckstoy
01-14-2008, 11:54 AM
here it is
http://memimage.cardomain.net/member_images/12/web/660000-660999/660387_43_full.jpg

luckydawg003
02-17-2008, 02:40 PM
I have a 07 coupe Mustang, and need a box for my 2 kicker cvr 10's. I like the design of el rafa's box. Would it sound better to have the subs facing my trunk opening or towards the front of the cab, as close to the rear seats as possible. thanks

UCF52
02-17-2008, 03:10 PM
I have a 07 coupe Mustang, and need a box for my 2 kicker cvr 10's. I like the design of el rafa's box. Would it sound better to have the subs facing my trunk opening or towards the front of the cab, as close to the rear seats as possible. thanks

In my experiences with my 'stang I would say the best output was firing towards the rear.

UCF52
02-17-2008, 03:20 PM
You should try porting up through the rear deck, that would be cool. A couple of 4" or 6" aeros should do the trick.

IDSkoT
02-17-2008, 03:28 PM
I have a '98 Mustang, but from my knowledge, it has the same trunk.


This is my enclosure:

http://img.photobucket.com/albums/v714/TwistedShot/DSCF1255.jpg

http://img.photobucket.com/albums/v714/TwistedShot/DSCF1254.jpg


If you can tell, the front is angled to fit properly into the back of my car so when you fold the seats down you see the subs.
I'm not sure if it's the most effecient. But, that's how my current set-up is.
What my prospect build is like this:


http://img.photobucket.com/albums/v714/TwistedShot/Sub%20Box%20and%20Amp%20Rack/Boxview1.jpg

The sub box would be held up to the top of the trunk's hangover. The bottom would be an amp rack.
If you want, I can make a sketchup of something you'd be interested in. PM me.

zierbox
02-17-2008, 04:17 PM
http://i217.photobucket.com/albums/cc19/zierbox/DSC00019-4.jpg


http://i217.photobucket.com/albums/cc19/zierbox/DSC00011-3.jpg

luckydawg003
02-17-2008, 05:37 PM
Zierbox, how big is the magnet on that sub? Man that thing is huge.
I just re looked at my trunk to see were I wanted my sub box to go. I don't think it will work because their are a bunch of wires coming up from the back of the trunk by the rear seats. So the width could only be like 28". Also I just noticed that the hump has a high point in the middle of the trunk, so the box can't be taller than like 10".

el rafa
02-18-2008, 07:13 PM
I have a 07 coupe Mustang, and need a box for my 2 kicker cvr 10's. I like the design of el rafa's box. Would it sound better to have the subs facing my trunk opening or towards the front of the cab, as close to the rear seats as possible. thanks


I would do towards trunk. If you face the cab, I believe you have to seal off your trunk. I'll send you some pics when I get home tonight.

That design BJ did is pretty awesome too.

el rafa
02-18-2008, 10:37 PM
Here are some pics of my setup in my 06 GT.

http://i42.photobucket.com/albums/e307/raspucho25/DSC00012.jpg
http://i42.photobucket.com/albums/e307/raspucho25/DSC00013.jpg


This is the back of sub box behind back seat. Those amp racks are no longer there. This box fit's snug.


http://i42.photobucket.com/albums/e307/raspucho25/DSC00018.jpg



These next pics are when I redid the amp rack. I went ahead and flush mount them on the face plate itself.

http://i42.photobucket.com/albums/e307/raspucho25/100_2610.jpg
http://i42.photobucket.com/albums/e307/raspucho25/100_2612.jpg

http://i42.photobucket.com/albums/e307/raspucho25/100_2614.jpg

http://i42.photobucket.com/albums/e307/raspucho25/100_2615.jpg

luckydawg003
02-19-2008, 04:59 AM
Do you have any pics of just the sub box from the trunk opening view. Before you added the new amp cover piece? Thanks

el rafa
02-19-2008, 01:11 PM
Do you have any pics of just the sub box from the trunk opening view. Before you added the new amp cover piece? Thanks


No I don't. I didn't put carpet on front of sub box cuz the faceplate was going to cover it. I can still take out my spare. Only thing I added to box was a piece of MDF to side of box to bolt face plate too. When I redid faceplate I used metal straps instead.

Mach1threat
02-19-2008, 05:45 PM
I have a 2004 Mustang mach1. I currently have two 12" AA Atlas Subs & Ported Enclosure. My problem is the ported enclosure was so big (smallest double I could find) that I had to take the backseats out inorder to get the box in there. Thats not the problem though...


My problem is I cant access the spare tire if I need to, so theres no point in putting the back seats back in if I cant access the spare tire. The ported box sounds ALOT better than any sealed box I had in there previously.

What are my options here? I would love to be able to take the sub box(s) out normally through the trunk.

1) Keep spare tire out, get AAA
2)Get two seperate sealed boxes that equal around same dimensions
3)Downgrade to 8" or 10" subs, and get new box that should fit
4)Pay $200+ to have a shop build a custom box and be done with it all!