View Full Version : 2 sets of comps, Do i need 2 xovers?

12-15-2007, 02:18 PM
I have 2 sets of diamond audio D6 in the door, Do i need to use both crossovers with each set or can I just run each door off of 1 crossover?

12-15-2007, 02:20 PM
Theoretically, because i dont know much about this but, if that would work you would be splitting the power in half. Just use both.

12-15-2007, 02:22 PM
****... thats alot more wiring but ohh well.

12-15-2007, 02:24 PM
You do not want to run 4 speakers off of one passive crossover.

Passive's xover frequency and other things are designed specifically for a certain impedance. If you change the impedance at the passive, you will change the crossover frequency and potentially cause other features of the crossover to not function as intended.

You need to use all of the crossovers the speakers came with.

12-15-2007, 04:26 PM
thankyou for the deffanite answer sir :)

12-15-2007, 05:06 PM
but you can connect the input wires together so you only have one set of wires to run from your amp, and you will be running at 2 ohms on your amp which will give you more power

12-16-2007, 01:31 PM
More but probably not double. Each set will be getting less power than a single set would running on 4 ohms. Don't get me started on the freq response ramifications of running a second set of speakers up front...