PDA

View Full Version : Wicked One!



SneakyDoc
12-12-2007, 08:40 PM
hey guys is there anyone out there can design me the wicked one that will be able to fit two L7 10's dual 4's please help because the wicked one is a nice box and i need just measurements. thanks i have money for the design thank you.

bonesninja
12-12-2007, 08:41 PM
wtf is "the wicked one?"

dragnix
12-12-2007, 08:42 PM
wat car do u drive? Not a lot of cars has that kind of space

PsychoTheRapist
12-12-2007, 08:45 PM
Doesn't Decware have a forum?

Immacomputer
12-12-2007, 08:48 PM
I wouldn't really recommend using a folded horn in a vehicle as they don't normally work out well. Are you building this for a home or car application?

Rattlebrain
12-12-2007, 08:52 PM
http://www.decware.com/whornok.htm
and check the construction notes

SneakyDoc
12-13-2007, 07:10 PM
i plan to put it in an extended cab mazda b2300. i know it is possible because i have seen the video of two 12 infinities in an extended cab ranger which is the same thing. i just want something i know will be really loud.

dragnix
12-13-2007, 07:10 PM
wicked ones aren't designed to be loud :fyi:

SneakyDoc
12-13-2007, 07:15 PM
the one i seen was amazing! heres the link. http://www.youtube.com/watch?v=3qPXKdu9f7Y

JimJ
12-13-2007, 07:16 PM
I haven't seen one in an SPL application, but they're awfully impressive for output, and the one I heard was acceptable in terms of accuracy as well :)

If you have money for a design, why not just pay Decware for it? Their customer support is top-notch...for both their designs and their amplifiers.

60ndown
12-13-2007, 07:16 PM
wicked ones aren't designed to be loud :fyi:

The chart above shows the SPL response potential for a pair of 10" Rockford Fosgate woofers (RF108's) in a perfect 4th order enclosure of 10.01 cubic feet. The response is indicated by the blue line in the chart.
Using the same woofers, the response was measured after installation into this dual band pass horn. The results of that are indicated by the red line in the chart.

The yellow area represents a serious gain in efficiency between the two enclosures. The dual band pass enclosure is also smaller in size by 1 cubic foot.

:veryhapp:

dragnix
12-13-2007, 07:17 PM
i stand by wat i said

for now

BrianChia
12-13-2007, 10:02 PM
How's this:

http://img241.imageshack.us/img241/6679/decwarewickeduq1.png

ramos
12-14-2007, 08:55 AM
My picture looks more realistic :)

http://i15.photobucket.com/albums/a393/moyerme/3f36ca30.jpg

ramos
12-14-2007, 09:00 AM
I haven't seen one in an SPL application, but they're awfully impressive for output, and the one I heard was acceptable in terms of accuracy as well :)

If you have money for a design, why not just pay Decware for it? Their customer support is top-notch...for both their designs and their amplifiers.


If 50w to a pair of $5 8" power acoustic subs is decent enough for this picky bastage to listen too. :p: Imagine what decent subs with power would be like. :)


It's not that big really . a pair of 8's in this one in the back of the chitbox
http://i15.photobucket.com/albums/a393/moyerme/tje011.jpg

BrianChia
12-14-2007, 03:30 PM
My picture looks more realistic :)


Dam, no way :crazy:

How does that beast sound? I think I wanna give this a go with some cheap 8-10 inchers. 36" x 24" isn't really that big at all, certainly not in a truck or SUV or hatchback. I'll probably use it for home audio.

dragnix
12-14-2007, 03:31 PM
wow, that box is for 2 8s?

Immacomputer
12-14-2007, 04:12 PM
I'm running a single 8 in 3 cubes net. Enclosure size has very little to do with cone area.

dragnix
12-14-2007, 04:15 PM
then wat is in direct correlation to enclosure size?

audioarsonal
12-14-2007, 04:27 PM
output and power handling.

dragnix
12-14-2007, 04:28 PM
perhaps i should say, wat exactly determines the enclosure size?

audioarsonal
12-14-2007, 04:32 PM
Application.....

dragnix
12-14-2007, 04:33 PM
lol, i give up then

audioarsonal
12-14-2007, 04:39 PM
Using a box that's too small can have adverse effects both on your system's output level and on its deep-bass performance. Efficiency is another matter of concern; typically, sealed-box systems are less efficient than vented systems (see below) and require more power and equalization to achieve comparable output levels

GoochJuice
12-14-2007, 04:41 PM
im pretty sure hes just trying to find out how to scale a "wicked one" to fit his subwoofer of choice.

dragnix
12-14-2007, 04:42 PM
Using a box that's too small can have adverse effects both on your system's output level and on its deep-bass performance. Efficiency is another matter of concern; typically, sealed-box systems are less efficient than vented systems (see below) and require more power and equalization to achieve comparable output levels

that's talking about functions of boxes in general, my question mainly pertains to the Wicked one. Though many things are the same, i doubt if all things remain the same after all is said and done.

dragnix
12-14-2007, 04:42 PM
im pretty sure hes just trying to find out how to scale a "wicked one" to fit his subwoofer of choice.

i'm sure he knows that too

60ndown
12-14-2007, 04:43 PM
If 50w to a pair of $5 8" power acoustic subs is decent enough for this picky bastage to listen too. :p: Imagine what decent subs with power would be like. :)


It's not that big really . a pair of 8's in this one in the back of the chitbox
http://i15.photobucket.com/albums/a393/moyerme/tje011.jpg

i bet that would sound much better with the port/opening firing down.

audioarsonal
12-14-2007, 04:45 PM
It all has to do with application and the woofers T/S parimeter.Are you going for tight bass response or do you want that boomy bass?

SneakyDoc
12-15-2007, 11:59 AM
i appreciate the help guys but i heard that the l7's would be abd for that box because they move too much and that with that design i wont be able to get the full potetial out of the sub with that box.

ramos
12-17-2007, 09:28 AM
Dam, no way :crazy:

How does that beast sound? I think I wanna give this a go with some cheap 8-10 inchers. 36" x 24" isn't really that big at all, certainly not in a truck or SUV or hatchback. I'll probably use it for home audio.


Has a very flat response, and ridiculous output. Don't think anybody that heard it thought otherwise :)

ramos
12-17-2007, 09:29 AM
wow, that box is for 2 8s?


Yeah , but the driver itself is only in a .5 cuft sealed enclosure. :)

ramos
12-17-2007, 09:30 AM
i bet that would sound much better with the port/opening firing down.


Never tried it in the car , but it really reinforces the low end in the house with it firing towards the floor . :)

luvinthebass
12-17-2007, 09:35 AM
obviously

JimJ
12-17-2007, 01:01 PM
wow, that box is for 2 8s?

I have boxes for a single 6.5" that are more bulky than that :D

Famous_78
12-17-2007, 01:08 PM
I built one of these once, there pretty cool boxes 2 10's got unreal low. But if your looking to fit 2 l7 10's in one it wont happen.

djman37
12-17-2007, 01:19 PM
i've built one. plans are free, can't beat that. phil at woodlawn cabinetry builds all Decware boxes. You can get one built from Decware if you want as well(has been said already) You CAN fit L7 10s in it. Dig around on their forum, you'll find me, ramos, 60ndown, rattlebrain and jimj there as well. I built my WO for 12s and just did the stretch up method instead of xyz scale and mine sounded amazing. I have a couple of pics maybe still of it with RE SE 12's somewhere.

after removing the polk 1224's
http://img211.imageshack.us/img211/1905/wochisel5gs.th.jpg (http://img211.imageshack.us/my.php?image=wochisel5gs.jpg)
SE 12's installed
http://img211.imageshack.us/img211/8909/woloaded0vq.th.jpg (http://img211.imageshack.us/my.php?image=woloaded0vq.jpg)

JimJ
12-17-2007, 01:22 PM
you'll find me, ramos, 60ndown, rattlebrain and jimj there as well.

I don't post there anywhere near as much anymore, ever since I sold my Decware amps :(...I really should, it's a lot more mature than here.