PDA

View Full Version : box specs



chinxtaboi
12-10-2007, 06:58 PM
i used the calculator from bcae.. is it accurate? ive been reading around on the forum here and been seein that a lot these online calculators arent accurate.

these are the numbers i got.

http://img.photobucket.com/albums/v499/sebxa6/specs.jpg

05gliguy
12-10-2007, 07:00 PM
So you're wanting to run two 2" ports? Why?

BuckyBoy
12-10-2007, 07:05 PM
2"x2" ports?
Your port area needs to be around 35-40 and it is only 6.28
Make your ports 2x12.5, slot ports. Unless you are wanting a square port.

chinxtaboi
12-10-2007, 07:16 PM
i want two ports one on each side of the sub, make it look more symmetrical in the trunk.

if i make two slots at 2x12.5 do i keep that length given in the calculator? im so lost.

BuckyBoy
12-10-2007, 07:40 PM
you change the ratio from 1:1 to 1:6.25.

chinxtaboi
12-10-2007, 09:38 PM
when i plug that in.. it wont give me a port dimensions.

i tried using winisd.. but it get all these numbers and dont know where to apply it. and i donno how to read thr graph.

BuckyBoy
12-10-2007, 09:59 PM
are you going to be running one 12?

chinxtaboi
12-11-2007, 02:45 AM
yea single 12" memphis m3