PDA

View Full Version : hows this box for 2 12 SSD's?



mustanggt5330
12-10-2007, 01:20 AM
http://s260.photobucket.com/albums/ii23/mustanggt5330/?action=view&current=box1.jpg

mustanggt5330
12-10-2007, 01:32 AM
bump....

Canaan
12-10-2007, 01:42 AM
Looks ok, just make sure you round over those ports.
If not, you may end up w/ some port noise.

James Bang
12-10-2007, 01:43 AM
..

mustanggt5330
12-10-2007, 01:49 AM
are there any better options with thoes dimentions?

BrianChia
12-10-2007, 01:52 AM
If you do a single chamber and single port you get less space taken up by the materials and more space for increased port area.

SeanDub
12-10-2007, 01:56 AM
it looks fine

mustanggt5330
12-10-2007, 01:56 AM
you wanna make a design? 35 w 15 h 25 d

mustanggt5330
12-10-2007, 01:57 AM
single or double chamber?

mustanggt5330
12-10-2007, 02:41 AM
bump...

BJ The Man
12-11-2007, 04:55 PM
you will like it. i think SSD's need just a bit smaller boxes. like for my 15 i think 3-3.5 would be perfect and for your 12 2.2 should be great.

post pics when you build!

jblayz1
12-11-2007, 06:49 PM
don't mean to thread jack but, are the chambers on this enclosure 2.2cu before or after driver displacement. i'm looking to build a similar enclosure for 2 12" Q's.

mustanggt5330
12-11-2007, 08:17 PM
before displacement

BrianChia
12-11-2007, 08:18 PM
They are 2.2 before driver displacement.

I don't have any direct experience with them but I think Q's would do better with lower tuning.

jblayz1
12-11-2007, 09:42 PM
They are 2.2 before driver displacement.

I don't have any direct experience with them but I think Q's would do better with lower tuning.

definitely 30hz or lower. i'm aware :D.