PDA

View Full Version : !!!!Box Design Help!!!!



Freelander
12-09-2007, 06:40 PM
For christmas my girlfriend is buying me a couple subs to hold me over until I have the funds to do the system that I really want.

She is going to be getting me two Pioneer TS-W301R. They are single 4 ohm and I will be powering them with a Clarion 3200A 4 channel amp. Bridged it does 380wrms @ 12volts.

Basically I'm wanting a vented enclosure. Maybe using aero's since I've never used them before. I want a sub on each side and the amp rack in the middle.

Pioneer says 1.65ft^3 for each sub is recommended. But they also say that 1ft^3-2.2ft^3 is good.

This will be going in the back of my Land Rover Freelander. The space I'm working with is about 39" wide, 20" tall and 25" deep. I'll have to go up in the attic and find the amp so I can give the dimensions of it but won't be able to until tomorrow.

Can anyone help me out. Aero or Slot ported don't matter to me.

Freelander
12-10-2007, 02:42 PM
anyone?

profundus-sanus
12-10-2007, 02:47 PM
why worry about an amp rack if its temporary? Just mount the amp on the side of the box..

anyway, i'll see what i can come up with.

Freelander
12-10-2007, 02:53 PM
well I say temp....but it will be in there for a while so I want it to look nice

Freelander
12-10-2007, 03:07 PM
http://img119.imageshack.us/img119/566/ampiq9.jpg

http://img90.imageshack.us/img90/7021/amp2rv6.jpg

there are the deminsions of the amp

Freelander
12-10-2007, 03:35 PM
More info on the sub...

Revc: 3.0
Levc: 1.380
Fs: 28.0
Qms: 8.12
Qes: 0.79
Qts: 0.72
Vas: 3.679 cu. ft
Rms: 2.293
Mms: 110.8
Cms: 3.1x10*4
Diam: 9.86 inch
BL: 8.67
Xmax: 0.35 inch

jmanpc
12-10-2007, 04:37 PM
I'll help you out :)

Freelander
12-11-2007, 02:12 PM
jmanpc made me a great design....anyone else want to take a shot at it? I'd like to see some different options.