View Full Version : 2001 Altima Owners

12-09-2007, 05:14 PM
so i was measuring my buddy's trunk
and ****ing forgot the width of the trunk opening
i wanna say it was like 35 or somethin
but i cant remember
nay help/?

12-09-2007, 05:19 PM
honestly, i need to know the biggest ill be able to fit in there
im shootin for 5 cubes and its a big *** trunk
but the height of the opening is only like 17 inches and theres not really any way to put it in from the cabin

12-09-2007, 05:25 PM
I know this is off subject but would you be interested in some M3s?

12-09-2007, 08:10 PM
lets talk about it in pm, keep the thread on topic

12-09-2007, 08:23 PM
Well I was tempted to answer, but I am not that mean....

So you really think it is a good idea to build a box based off the measurements you get from people online, I was almost going to makeup some BS like it's 35.5" just to hear the reply after you build this thing and it doesn't fit.

If I were you I would re-mesure

12-09-2007, 09:06 PM
...dude, i never got measurements, he came back after he got off of work and i measured. think before you post you ****

not everyone is out to **** people off
there are some people on here who are giving genuine information and advice

12-09-2007, 09:07 PM
you ****

I do...so how you doin???

12-09-2007, 09:08 PM
the noun form, haha

12-09-2007, 10:11 PM
If it's like my 2000 then 5 cubes might be tough. I fit 4.5^3 and it was TIGHT. Doesn't it have fold down rear seats? If so, you would probably need to cut the opening up some, that's how I fit 8.5^3 in mine...

12-09-2007, 11:09 PM
the openins is aroung 35 min at the bottom and about 17 high in the middle in the rear most portion of the trunk its about 50ish wide by about 20 high and the back is about 38ish wide by about 20 high. the external dimetnions are around 35.5 wide , 25.5ish deep, and 15.5 high so when putting it in an angle, it should fit like a glove