PDA

View Full Version : port like this in a trunkcar?



sjobas
12-08-2007, 09:42 PM
anyone done like this with good result? almost everytime when we do like this it sounds alot better when i open the trunk, and the frontdoors.. why?
http://i31.photobucket.com/albums/c359/sjobas/hatthylla.jpg

Foote
12-08-2007, 09:42 PM
Edit: Nevermind I read what you were saying wrong.

beats me...but I think everyone knows its louder when the sound pressure has some where to go...via rolled down window, open door, etc.

kuijo
12-08-2007, 09:46 PM
Opening up windows lowers cabin pressure and allow for more excursion (at least thats my understanding anyway). I don't think the advantage of what you're trying to do will out way the amount of work it will take.

Jeremy M
12-09-2007, 12:29 AM
i was thinkin of going with the same setup, port throu rear deck.

IamDeMan
12-09-2007, 08:13 AM
Don't these port through rear decks behave like BPs with a large sealed cavity? It would seem as though they did. Unless there is enough openings from trunk to cabin for the front wave to meet up with it. Most trunks I have dealt with don't have that much opening and seems like this would create a small 4th order effect.

skadude016
12-09-2007, 08:26 AM
I remember a guy on here trying this and not having great results

AVX Mike
12-09-2007, 12:59 PM
I've tried it. I've also tried the sub and ports up through the rear deck. Firing ports and subs backward was about 2-3 db+ up from firing into the glass. If it gets louder in the cabin when you open the trunk you have cancelation issues in the trunk. There are louder designs for trunks other that those options also. I know of two that can do 150+ on 2-12" kicker or 2-10" subs with only 1200 watts on the tens. Great for daily too.

Jeremy M
12-09-2007, 02:11 PM
anyone done like this with good result? almost http://i31.photobucket.com/albums/c359/sjobas/hatthylla.jpg

woudn't u want to seal off the rear deck, well everything but the ports?
cuz i was really wanting to go with this idea but if it has poor results then i duno

sjobas
12-09-2007, 02:55 PM
yes everything accept the port must be seald up.. this videos are an install in a friends passat with a DD2512a, when the door and trunk was closed it played something around 130dbs, but with open trunk and front doors it was something like 140dbs
http://i31.photobucket.com/albums/c359/sjobas/th_MOV00005.jpg (http://s31.photobucket.com/albums/c359/sjobas/?action=view&current=MOV00005.flv)
http://i31.photobucket.com/albums/c359/sjobas/th_MOV00009.jpg (http://s31.photobucket.com/albums/c359/sjobas/?action=view&current=MOV00009.flv)
http://i31.photobucket.com/albums/c359/sjobas/th_MOV00008.jpg (http://s31.photobucket.com/albums/c359/sjobas/?action=view&current=MOV00008.flv)

Anniku989
12-09-2007, 03:01 PM
I've always thought about that.

I've contemplated grabbing another rear set for my grand am outta the junk yard, and strip the back/inside of it out, so it looks stock, but only has a thin sheet of fabric on it. Then facing the subs toward that instead of back.... Too much work for me though (at least in this <0* weather), so I haven't got around to experimenting with it.

rollerdj
12-09-2007, 03:08 PM
i did something like this in the past. a single 15 facing back. a slot port aimed up at the rear deck. but the port wasn't going up though, just aimed at it. sounded really good. my personal opinon is that would be the way to go.

Jeremy M
12-09-2007, 06:52 PM
what about subs up, and aero's throu the rear deck? or would sub back and ports up be better?

AVX Mike
12-09-2007, 08:54 PM
I've tried sub up and ports up (2-4" pnr) through the 6x9 holes with a hole new deck made from half inch mdf. Subs back and ports back is louder to the ears and on the meter. What do I know though I only made 12 boxes in 14 days to find this out.

skeptikal
12-10-2007, 01:58 PM
Loudest in my trunk was port at the drivers side and subs forward with the box all the way to the back.