PDA

View Full Version : need box builder for 2003 mustang



sxkicker89
12-08-2007, 03:40 AM
i have 2 12 l7 and would like to have them go in a ported box.lookin for some1 who had built a box in a mustang before.i remove the mach amp rack.need this box build by the 20 any takers

mobeious
12-08-2007, 10:32 AM
hit me up with a PM of details of what u want and i can help ya out

sxkicker89
12-08-2007, 11:57 AM
pm sent

iamamp3pimp
12-08-2007, 12:51 PM
mobs is a good builder.

mobeious
12-08-2007, 12:59 PM
thnx

king ranch
12-08-2007, 01:39 PM
hey can i get a box builder for the same 2 12's l7 but in a f150 instead

mobeious
12-08-2007, 01:51 PM
PM me im in florida bout 1.5hr from u

king ranch
12-08-2007, 03:18 PM
i wish i knew how to pm i am new to this forumn and if possible can u pm me
thanks

truckramrod
12-08-2007, 04:23 PM
Your looking at a roughly 5 cubic ft box. That will have to be built inside of the trunk. I had to build a 5.4 cube box for my buddys 03 stang coupe.

sxkicker89
12-08-2007, 11:14 PM
really wow.i dont want the box to take up the whole trunk but still be a nice size.do u build boxes also truckramrod.

UCF52
12-09-2007, 01:33 AM
Here (http://www.caraudio.com/forum/showthread.php?t=266206) is a recent build for 2 12" L7's in a mustang trunk (it's an older mustang, bu the physical dimensions should be the same)

sxkicker89
12-09-2007, 02:01 AM
yea i sawe that i dont think it will fit in my trunk.also dont know how to remove the seats.couldnt i just take a inch off everythin.would that work

BuckyBoy
12-09-2007, 02:22 AM
yea i sawe that i dont think it will fit in my trunk.also dont know how to remove the seats.couldnt i just take a inch off everythin.would that work
the height of that box is 13", which is the minimum for a 12" sub

UCF52
12-09-2007, 08:33 AM
You're not going to get 12's in there (firing towards the rear) without a slanted baffle, or modifying the opening - meaning bending the metal across the top back. There is also a little hump on the bottom of the trunk to take into consideration.

sxkicker89
12-09-2007, 02:06 PM
darkfox got his to fire to the rear and foward.u know anything about them firing up an port facin rear.

UCF52
12-09-2007, 07:07 PM
darkfox got his to fire to the rear and foward.


You're not going to get 12's in there (firing towards the rear) without a slanted baffle, or modifying the opening - meaning bending the metal across the top back. There is also a little hump on the bottom of the trunk to take into consideration.

^-- he modified the opening of the trunk i.e. bent back/removed the metal along the top of the opening.


u know anything about them firing up an port facin rear.

I have never done a ported enclosure in my trunk, but I have tried 2 12" W6.v1's facing towards the rear and up and I prefer rear firing.

iamamp3pimp
12-09-2007, 09:43 PM
You're not going to get 12's in there (firing towards the rear) without a slanted baffle, or modifying the opening - meaning bending the metal across the top back. There is also a little hump on the bottom of the trunk to take into consideration.
fail

me and Joel got a 4 cube box for a 15 in his stang

its an 04

UCF52
12-09-2007, 09:50 PM
fail

me and Joel got a 4 cube box for a 15 in his stang

its an 04

Really... a 15" sub firing towards the rear without touching the metal at the opening of the trunk (from the interior). The max height is between 11.5 and 12 inches. How the hell did you do that? Wait... did you build the box in the trunk??