View Full Version : Can Someone Help Me With A Slanted Front Enclosure
riddla
12-06-2007, 09:14 AM
This is what I can work with to get it in my boot.
28 to 30in L x 15in H x 18 to 20in Deep. A normal design box just wont go in.
Its for a 15in, Please help some1.
All I need to know is what cuts to get for this enclosure tuning to be around 28 hz if possible.
Rawr-DQ
12-06-2007, 09:20 AM
pics of car and girlfriend naked plz...wait is she fat?
alxmlr789
12-06-2007, 09:23 AM
PM bjfish11.. he'll help you out.
mlstrass
12-06-2007, 10:31 AM
Use the Wedge2 calculator:
http://www.the12volt.com/caraudio/boxcalcs.asp#wed2
riddla
12-06-2007, 11:14 AM
ok thanx, never seen that one but it doesnt tell me what cuts I would need
RHoughton1
12-06-2007, 11:17 AM
http://www.reaudio.com/speaker_box/LPort_Box_Calc.html
Heres one I use
dan5505
12-06-2007, 11:24 AM
http://www.subwoofertools.com/forum/ported-box.asp
heres another, it tells you the cuts too
riddla
12-06-2007, 11:37 PM
Ne1
dan5505
12-06-2007, 11:50 PM
First, what sub is it going to be for. you said it has to be slanted?
riddla
12-07-2007, 06:42 AM
First, what sub is it going to be for. you said it has to be slanted?
its for this sub
http://www.fusioncaraudio.com/products.php?region=2&action=view&product_id=31
dan5505
12-07-2007, 11:27 AM
This is what I can work with to get it in my boot.
28 to 30in L x 15in H x 18 to 20in Deep. A normal design box just wont go in.
Its for a 15in, Please help some1.
All I need to know is what cuts to get for this enclosure tuning to be around 28 hz if possible.
Given these dimensions you should be able to fit this.
http://www.subwoofertools.com/forum/ported-box.asp?Ew=30&Eh=18&Dia=9&Xmax=14&Vd=.15&NumW=1&Vb=3&Fb=28&Qts=&Vas=&Fs=&CE=0
i know its not slanted but its within your dimension constraints. 3 cubes @ 28Hz
dan5505
12-07-2007, 11:29 AM
http://www.subwoofertools.com/forum/ported-box.asp?Ew=29&Eh=17&Dia=9&Xmax=14&Vd=.15&NumW=1&Vb=3&Fb=28&Qts=&Vas=&Fs=&CE=0
This would also work, slightly different dimensions.