View Full Version : Which of these would work the best?

coolest user
12-05-2007, 11:45 PM
Would any of the following designs work well to put four 15's in the back of an SUV?

All the pics are viewed from looking down at the top of the vehicle, and in pic 2 the subs are facing toward the roof.




12-05-2007, 11:47 PM
Option 2 is your best bet.

12-06-2007, 12:30 AM
Option 2 is your best bet.

I agree. Dont do option 1, im pretty sure its a car audio sin to face subs at each other like that. terrible cancellation

12-06-2007, 10:22 AM
lol be a sinner.

You doing sealed or what?
Go with option 2 anyway

12-06-2007, 11:33 AM
Option 4: cut holes in roof and mount them IB...

coolest user
12-06-2007, 10:39 PM
Thanks everyone for the help.

You doing sealed or what?

Most likely sealed.


12-07-2007, 12:17 AM
if your going to the extent to put 4 15s in a SUV, go big and port it while your in there IMO. What subs you gonna roll?

coolest user
12-07-2007, 12:47 AM
I am wanting to use the Power Reference subs by Memphis and a Memphis Belle MCH1300 for power. My local dealer can sell me the subs for $89 each and the amp for $700. I haven't compared the prices yet to anything else, but it seems like a good deal.

This will all be going in a Suburban, so there should be plenty of room for a ported box, and I would love to have a port box, but I'm unsure of calculating the port size. I am currently working on putting three JL 12W-1's in my other ride, and I want a ported box, but my port length math isn't matching the port length in the JL manual...

This project won't begin for a couple months, so I have plenty of time to think about it.


12-07-2007, 10:24 AM
you come here with a GOOD description of what space you have to work with, and people usually help. So long as your not like some of these people that are like, "I have 2 12s, what size and length of port do I need." you will be fine.