PDA

View Full Version : Box build I messed up



riddla
12-03-2007, 03:17 PM
Im P***** because the box wont fit in my car. Its slightly out & I now where I went wrong with measuring my trunk. The only way it will go in is if I build the box exactly the same but make the front slanted so that it can squeeze in my trunk. I would also like to decrease the depth from 22in to about 18in max & the width to less than 32in prefebable 28in but still want to get the same tuning frequency etc.

Can some1 help as I just aint getting anywhere with this. I dont know how to use all these calculators etc.

Heres the one Ive just built

top and bottom are 32x22
back is 32x15
front is 27.75x15
left side is 20.5x15
right side is 21.25x15
1st port piece is 17x15
2nd port piece is 21.25x15 TUNED TO 28hz

What do i change to make the front slanted but with a depth of 18in and width under 32in please

riddla
12-03-2007, 05:29 PM
Bump

PV Audio
12-03-2007, 05:49 PM
Son, what are the dimensions of the trunk opening, width, height and depth?

riddla
12-03-2007, 06:20 PM
Here is a pic of the boot. Its a funny shape which is the problem to get it in. Its a bmw e36.

Trunk opening as follows

L = around 28. H = 16 just to get it in the boot but no more. It can slide in from the back seat but height has to be 16in max & depth would be around 18in I would like the depth no more than 18in as I want some boot space. I Hope this helps ?

riddla
12-04-2007, 05:10 PM
bump ne1

tapout
12-04-2007, 05:54 PM
nvm

riddla
12-04-2007, 06:23 PM
nvm

sorry but whats nvm please

xplicitACTS
12-04-2007, 06:26 PM
sorry but whats nvm please

Need viginal modifications.

I think it means never mind.

Immacomputer
12-04-2007, 06:30 PM
"Viginal" eh?

riddla
12-04-2007, 07:26 PM
huh?

ThatChevyGuy
12-04-2007, 07:49 PM
wut u puttin in der?

riddla
12-04-2007, 07:51 PM
seen. Its a 15in fusion powerplant ?

BuckyBoy
12-04-2007, 08:36 PM
measure twice, cut once?

IgnoreMe
12-04-2007, 09:24 PM
you you tried getting the box in through the back seat?

when i made a box for my buddies car it too would not go in through the trunk (i am used to designing for SUV's lol).

it had fold down seats so we tried going in that way. it was a TIGHT squeeze, but we got it and it saved us having to build another box.

your seats look like they are fold down as well :) i would give it a shot.

Anniku989
12-04-2007, 09:31 PM
Haha, my box didn't fit in the grand am's trunk. So I had to unbolt and take out off of the rear seats to find out that it was still 2" too tall...

Bye bye to part of my rear deck... :D

xplicitACTS
12-04-2007, 10:20 PM
Need viginal modifications.

I think it means never mind.

;)

SuperchargedRS
12-04-2007, 10:34 PM
allow me to retort with a deeply felt.............................................. ...............................................wa wa waaaaaaaaaaa!

htownplaya456
12-05-2007, 01:51 AM
I knew you were going to post a thread up saying this. You didn't seem to know what you were doing in the first place but HEY you asked a bunch of questions before thats good. Measure 3 times cut and build 1 time!!

theCybe
12-05-2007, 02:52 AM
Nobody asked the right question!

It doesn't fit, or you can't get it in the car?

Very different scenario :)

Tip: Do not use a torquey hammerdrill with a 3" holesaw on it with your left hand inside the car. You will be thrown into the ceiling, and **** near break your wrist and neck when it siezes up.

AMHIK :P

riddla
12-05-2007, 09:20 AM
yer, it does fit, i just cant get it in the car. it may go in through the back seat but it will have to go in length way but then the problem is turning it around to fit which im pretty sure it wont. ill also haveto take of the back seat. all in the name of bass A

IamDeMan
12-05-2007, 12:45 PM
Nobody asked the right question!

It doesn't fit, or you can't get it in the car?

Very different scenario :)

Tip: Do not use a torquey hammerdrill with a 3" holesaw on it with your left hand inside the car. You will be thrown into the ceiling, and **** near break your wrist and neck when it siezes up.

AMHIK :PHole saws can be quite wrist wrenching in any scenario.

theCybe
12-05-2007, 04:54 PM
I about broke the rear glass with my nugget

lol