PDA

View Full Version : Sketch me a Design for 15" FI Q



nofriends46
12-01-2007, 11:06 PM
Its gonna recieve 1200watts @ 1ohm from my DLS A6

Would like a vented enclosure design *sketch*

I think theres only .5 or 1" MDF, from my local home depot. I'm not sure yet.

This will be my first box making, so im totally a newb...

It will be installed in a truck 05 tacoma acess cab.

Looking for a nice low end and maintain sound quality. SQL.
Not gonna show it off, just a daily driver! Enough to put a "wow", by my friends listening to it.

So im open to all designs. I listen to alot of rap/reggae mostly etc....

Thanks!

Audio Master
12-01-2007, 11:09 PM
why not get a box building programe i think there is some "SKETCHES" in the begiuneers thread thing of basic boxes and stuff do a SEARCH and you will find them or go to the main page and go to tecnical or enclosure or sunthing and check it out mang thats why we have the search button and its a good place to start i got mine from there a few tweakes ghere and there and its perfect

bball09124
12-01-2007, 11:09 PM
dimensions?

nofriends46
12-01-2007, 11:12 PM
I did search, by now. I figure, someone have tested few boxes. And found their favorites.


As well i am looking for a box buiding program...

sqhertz
12-01-2007, 11:17 PM
http://www.subwoofertools.com/forum/ported-box.asp?Ew=29&Eh=15&Dia=9&Xmax=18&Vd=.19&NumW=1&Vb=3.8&Fb=30&Qts=&Vas=&Fs=&CE=0

i have that in my blazer. **** loud and sounds pretty good. shook my rear view off today.

x2 on dimentions...

Audio Master
12-01-2007, 11:25 PM
i got a box building programe of either ssa forum or one of the factory forums on ssa it might have been fi for that matter ill try and attach it

nup cant do it it was called boxnotes . , flare-it and and volume setup they are .exe files but i forget where i got them try to google them it should find them for you

budahbuddy803
12-01-2007, 11:27 PM
www.reaudio.com has a free box building program

edit: more specifically (http://www.reaudio.com/speaker_box/LPort_Box_Calc.html)

nofriends46
12-02-2007, 12:35 AM
http://www.subwoofertools.com/forum/ported-box.asp?Ew=29&Eh=15&Dia=9&Xmax=18&Vd=.19&NumW=1&Vb=3.8&Fb=30&Qts=&Vas=&Fs=&CE=0

i have that in my blazer. **** loud and sounds pretty good. shook my rear view off today.

x2 on dimentions...



That seems to be a pretty good size box, and as well for the 30hz, good in my range.

But i think there is to much depth, might not fit. So a little more wider would be good, i have to go check...


What do you mean on the dimensions?

dan5505
12-02-2007, 02:07 AM
If you post message me your email, i can send you a design i finished this morning. I would post it but the file is too large. Its for a 15" Q in ~3.5 cubes @ 32Hz

nofriends46
12-02-2007, 04:47 AM
YGPM!

I believe their off on sundays, so i'll make the order on monday. While it comes in, i'll get started on the enclosure!

PV Audio
12-02-2007, 11:02 AM
*Shakes head....again*

If you don't know how to design a box by hand, a box building program is useless to you.

nofriends46
12-05-2007, 05:08 PM
Think im gonna build a box between 3.5-4.0 @ 32hz....

nofriends46
12-06-2007, 01:37 AM
Anybody wanna sketch me a design?

mlstrass
12-06-2007, 10:50 AM
Just get Subwoofer tools and plug in your dimensions. I did one that's 3.5cubes @ 32Hz and it has good SQ and hits low...

jellyfish420
12-06-2007, 11:12 AM
pm sent

nofriends46
12-06-2007, 02:52 PM
Here is the dimensions i get to play with...

22" Height
17" Depth
34" Width

For a Single Fi Q 15" D2 w/out bp power

Would like it tune to 32hz

dan5505
12-06-2007, 04:35 PM
if you can fit a couple more inches in the depth, this would work.
http://www.subwoofertools.com/forum/ported-box.asp?Ew=34&Eh=22&Dia=9&Xmax=27&Vd=.19&NumW=1&Vb=4.0&Fb=32&Qts=&Vas=&Fs=&CE=0