PDA

View Full Version : door speaker problem



ayebnneRedV6
11-29-2007, 06:37 PM
I am having a problem with my door speaker. I have pioneer TS-A1682R. They can handle 280 watts max, and I have a Kenwood KAC-8403 powering them. The problem is, if I turn it up all the way some times one of the front speakers will start to smoke. But, they still sound good. I took them out and looked at them and checked the wiring and everything looks good. The only thing I could think of is maybe moisture is getting to them and has ruined them but not visibley. They are not that old and Im not over powering them so I don't have any other ideas. Do I just need to replace them?

Techchild
11-29-2007, 06:50 PM
It looks to be that there rms on the speakers is 50 watts while you are giving it a 60 watt rms signal what are your gains set at because if your sending it dirty power (clipping or distortian) versus clean power (clear no distorion) then that is bad. Speakers can handle more clean power then dirty. :thumbupw:

ayebnneRedV6
11-29-2007, 08:11 PM
Could you please elaberate on what you mean by clean versus dirty power? Is that something I would be able to hear the difference in? If so, the sound is not ditorted at all as far as I can hear. And I think I have the gain all the way up.

zeuolaxxx
11-29-2007, 08:15 PM
go gain setting tutorial..

gijoe
11-29-2007, 08:31 PM
Gain all the way up is bad! Set your gains correctly and hopefully you can salvage your speakers. The gain is not a volume knob!

ayebnneRedV6
11-30-2007, 01:51 AM
Thanks for the help. I'm going to tune it tomorrow using the listening method.

Trey803
11-30-2007, 01:52 AM
get a dmm and measure your coils to see how much your fried em....they dont have much longer

ayebnneRedV6
11-30-2007, 10:47 AM
How do I go about measuring the coils