View Full Version : need design for 2 12" kicker L7's
help me out!
w = 31 inches
H = 14.5 inches
D = 28.5 inches
ported.... forgot to mention
thinking of going with this
11-27-2007, 10:13 PM
i have a box like that.i couldnt fit in my car its alittle bigger than that but its a great lookin box and sounds alrite when i had the subs hooked up on home system.
well the subs are goin in a 07 charger so well have to see. its for my boy, he wants go ported and wants the **** to slap hard so im lookin for ideas on box designs
11-27-2007, 10:21 PM
my box is 34wx15htx27d couldnt get in mustang trunk.it was built by vitveet on here who is a great builder.im sellin if u r interested i can take pics.to show u.lmk if it can help u
^^^ wont fit in the charger. thanks tho....how did it sound?
11-27-2007, 10:44 PM
never fit in stang.buts its got to sound good.
11-28-2007, 02:49 PM
Try this, using your Dim. , 14.5"H x 31"W x 28.5"D. 3/4"MDF, and .3^3ft for bracing and sub displacement. It is coming out at 5.992^3ft gross, slot port, 13" x 4" x 23.9"long@32Hz. after all displacement, 4.937^3ft net vol. This should do the job.
11-28-2007, 03:18 PM
.3^ft3 displacement for two 12's and bracing is a little small.I would say more like .5^ft3 For two 12's and bracing displacement.
11-29-2007, 07:30 AM
You know, you are right, I did make a mistake:rolleyes:, I put in for two 10's. I normally use .45^3ft for an average on two 12's, so at your dim., it would be 5.992^3ft gross, port, 13" x 4" x 25.1"long@32Hz, net vol after all displacement, 4.748^3ft.