PDA

View Full Version : Box builders come on in!!!



headbussaboi
11-20-2007, 10:06 PM
I am going to be building a box for an RF T115d2 (power T1). The only problem is that my box building skills are of a newb so I hope someone can point me in the right direction. Here's the current situation:

RF calls for a these specs:
3.25 cubes after port and displacement, tuned to 38hz

I want my box to be 3.5 cubes after port and displacement, tuned to 40hz. Displacement is .2 cubes. I have 34Wx17Hx18D to work with. These are outer dimensions. The height and width needs to stay the same but the depth can change. Here's where it gets me:

1. I'm going to do a slot port. What dimensions do my port have to be?
2. What would the depth be to complete my box with the correct airpace (3.5 cubes after said and done)?

poundindak69
11-20-2007, 10:08 PM
go to reaudio.com and use their box calculator

headbussaboi
11-20-2007, 11:34 PM
Does this look right?

http://www.subwoofertools.com/forum/ported-box.asp?Ew=34&Eh=16&Dia=9&Xmax=14&Vd=.2&NumW=1&Vb=3.5&Fb=40&Qts=&Vas=&Fs=&CE=0

Is it possible to relocate the port more towards the middle so it can blow through the rear seat arm rest?