PDA

View Full Version : i need help with my box chioce



bigb88
11-15-2007, 09:39 PM
i have 2 mtx 7500's with a 1400 watt amp in a open air application on a 4runner and i dont know what type of enclosure to use.... help please

JDBuilder
11-16-2007, 09:42 AM
With a 4runner, you can get some pretty good SQL from them in a ported enclosure. As long as it is built and tuned right, it will hit hard, clean and loud. What type of music do you like to listen to? I can help you plan out an enclosure if you like.

bigb88
11-16-2007, 02:17 PM
thanks abunch for helping, i like alot of rap and alterative pretty much like everyting, do you think the subs should be mounted straight back or at a angle kindof up ward

JDBuilder
11-17-2007, 07:27 AM
You are welcome. For the most part, firing the subs and port to the rear really seams to load the bass well in SUV's. You can put a slight angle to the baffle if you wanted, just not to steep. Keep the tuning 32-34Hz and it should hit and sound super.

bigb88
11-26-2007, 06:22 PM
ok i have another question now, i am having a custome box built, and idk what to ask for when they build it, its goning to have 2 mtx 12" 7500 and a 1400 watt amp, should i have them do 2 seperate chambers or and how sould the ports be done.

JDBuilder
11-27-2007, 05:42 AM
I would run both subs in a single chamber with one slot port tuned@32Hz.

bigb88
11-29-2007, 01:49 AM
ok, im kinda new to this stuff but i have ben a enthusiest for a wile, and i kinda know what im talken bout but not really im just tryen to figure this stuff out thanks for helpen, if you have any advice or any thing or if you know of like a crash corse on a sight i would appreciate any thing.

-thanks