PDA

View Full Version : Need help with box????



btdickey99
11-15-2007, 10:40 AM
*This is a repost of a couple weeks ago that I didnt have much success with as far as feedback.


The equipment that its for is:

2 Eclipse SW6000(10s)
JL A1200(soon to add another)

and all going into a 2002 Cavalier

*Right now its in a basic sealed enclosure and I'm looking at building him(my brother) a different design.

I was hoping to port them to see any difference and have been messing around with WinISD, and its telling me 9.6 cuft and ports of 4"long and 4"wide. This doesnt sound right to me and just wanted to check.

If anyone could help, even as little as to maybe to post where to find out specs of these subs then that would be great.


Thanks for any help

Trixter
11-17-2007, 02:58 PM
if you plan on adding another 1200, i'd probably do about 4cu' tuned to about 36hz with 4 3" precision ports...;)

thegreatestpenn
11-17-2007, 08:07 PM
you have a problem with slot port enclosures? anyways, 3 cu.ft. tuned to 33Hz would rock IMO (10's don't need all that space)

sinosic
11-17-2007, 11:55 PM
all i can find on the net is ported 2.5 cubes each....