gothsm

10-25-2007, 10:19 AM

I have 2x 15in Alpine Type Rs and I am unsure how to measure the sub displacement in the box. is there a formula to figure this out me be sure that I have the right amount of cubes after I build my box

View Full Version : sub displacement?

gothsm

10-25-2007, 10:19 AM

I have 2x 15in Alpine Type Rs and I am unsure how to measure the sub displacement in the box. is there a formula to figure this out me be sure that I have the right amount of cubes after I build my box

TylerBD12

10-25-2007, 10:22 AM

you should be able to go to Alpines website and it should have that in the specs for that sub.

hoss

10-25-2007, 10:25 AM

just figure about .1 cuft a woofer. this number is always very small.

TylerBD12

10-25-2007, 10:25 AM

0.123 cu. ft that's straight from the alpine website for a 15" type ARGHHHHH

Edit: if you have trouble with math that's .246 cu. ft for both of them.

Edit: if you have trouble with math that's .246 cu. ft for both of them.

gothsm

10-25-2007, 10:41 AM

so I would take that amount off the total cubes of the box?

hoss

10-25-2007, 12:23 PM

0.123 cu. ft that's straight from the alpine website for a 15" type ARGHHHHH

Edit: if you have trouble with math that's .246 cu. ft for both of them.

what did i say, .1 cubes :)

and yes, subtract that from your net.

Edit: if you have trouble with math that's .246 cu. ft for both of them.

what did i say, .1 cubes :)

and yes, subtract that from your net.

gothsm

10-25-2007, 12:52 PM

:hihorse: :veryhapp: Now my messures are complete (almost) ill take pics when I get to building the box seeing it will be one of my first boxes.