PDA

View Full Version : 04 15xxx box dimensions



Gilliz
10-20-2007, 08:21 PM
Hey,

Dave from RE recommends 4cft@34hz ported. Best I can find is moe lesters 4cft@35hz. I punched them in at the12volt, and it says 5.40213cft^3.

My trunk dimensions are 28" depth / 40" width / 19" height. (Given max width & height to be able to fit enclosure is 19 height x 40 width).

This will be my first ported box build:(. Any help with dimensions would be great.

Thanks.

twisztdauthorit
10-20-2007, 08:25 PM
those specs are for 1 speaker not 4 so your gonna have one hell of a big box
oh **** nvm i thought it said 4x speakers not an 2004

Gilliz
10-20-2007, 08:27 PM
No way I can fit 4 in the trunk lol.

IgnoreMe
10-20-2007, 08:49 PM
you will be fine with moe lesters box.

buddy had one in 4.1 cubes @ 29hz.....low end like a *****

Gilliz
10-20-2007, 09:04 PM
you will be fine with moe lesters box.

buddy had one in 4.1 cubes @ 29hz.....low end like a *****

Could you get / help with the dimensions on that pls?

Box newb, so help would be nice loo. thx!

Gilliz
10-20-2007, 09:06 PM
you will be fine with moe lesters box.

buddy had one in 4.1 cubes @ 29hz.....low end like a *****

It'll be seeing power from Saz 1500D. Still hella loud?

IgnoreMe
10-20-2007, 09:14 PM
It'll be seeing power from Saz 1500D. Still hella loud?

yes. that is more than enough power for that sub. you can probably go with a little smaller box as well.

tell you what, give me your max dimensions you want to work with and ill come up with a box real quick. i dont normally do this because i just dont like to, but ill make an exception. im assuming you want port and sub back?

Gilliz
10-20-2007, 09:18 PM
yes. that is more than enough power for that sub. you can probably go with a little smaller box as well.

tell you what, give me your max dimensions you want to work with and ill come up with a box real quick. i dont normally do this because i just dont like to, but ill make an exception. im assuming you want port and sub back?

Port ans sub back yes.

MAX dims are 28" depth / 38" Width / 18" Height.

Thanks

IgnoreMe
10-20-2007, 09:19 PM
Port ans sub back yes.

MAX dims are 28" depth / 38" Width / 18" Height.

Thanks

so do you want 4 cubes @ 34? or 32? or what

Gilliz
10-20-2007, 09:22 PM
4 cubes yes. I'm up in the air about tuning. I wan't to be between killer low end and loud pls!

Soooo, maybe 29, 30, 32 ish? Your opinion?

Thanks.

IgnoreMe
10-20-2007, 09:23 PM
4 cubes yes. I'm up in the air about tuning. I wan't to be between killer low end and loud pls!

Soooo, maybe 29, 30, 32 ish? Your opinion?

Thanks.

honestly the XXX has no problem getting low. you would be fine with any of them. lets just stick with what david recs.

skeptikal
10-20-2007, 09:23 PM
tune it @ 35, that sub will still get lowwww

Gilliz
10-20-2007, 09:24 PM
32hz i think then?

Gilliz
10-20-2007, 09:25 PM
tune it @ 35, that sub will still get lowwww

ok, 35 then?

IgnoreMe
10-20-2007, 09:26 PM
whatever you want. the xxx has no problem with lowend at all.

Gilliz
10-20-2007, 09:28 PM
4 @ 35 then. If you /someone can get box dims, it would help pls.

Thanks.

IgnoreMe
10-20-2007, 09:29 PM
4 @ 35 then. If you /someone can get box dims, it would help pls.

Thanks.

i can give you them however, if your just going to use 4 @ 35, why not just use moe's plans? will they not fit?

Gilliz
10-20-2007, 09:30 PM
4cft@35hz. I punched them in at the12volt, and it says 5.40213cft^3. ??

Gilliz
10-20-2007, 09:32 PM
Read a couple times some of his boxes were off a little or is it just me? Can't remember if it was cleared up or what.

IgnoreMe
10-20-2007, 09:32 PM
4cft@35hz. I punched them in at the12volt, and it says 5.40213cft^3. ??

your not accounting for the port volume. 5.4 is the gross volume of the box.

after all displacements its 4 cubes though.

his boxes dont account for end correction and subwoofer displacement. but those wont make a huge difference anyways.

Gilliz
10-20-2007, 09:36 PM
So throwing 15 in this box will work then?

http://img77.imageshack.us/my.php?image=4cubes35hz62sqin7io.png

Gilliz
10-20-2007, 09:37 PM
your not accounting for the port volume. 5.4 is the gross volume of the box.

after all displacements its 4 cubes though.

his boxes dont account for end correction and subwoofer displacement. but those wont make a huge difference anyways.

My bad moe! lol

fbi90909
10-20-2007, 09:38 PM
i used his 4cuft@30hz box plans and everything was fine. i just double baffled mine. on that saz it will be loud but to me it feels like i needs more, but that's cause i went from a pca2000D to a saz1500D. :/

Gilliz
10-20-2007, 09:40 PM
i used his 4cuft@30hz box plans and everything was fine. i just double baffled mine. on that saz it will be loud but to me it feels like i needs more, but that's cause i went from a pca2000D to a saz1500D. :/

4@30 design is removed. Lol man, I think you may be half deaf? Downsizing does **** and you usually notice it..alot lol.

IgnoreMe
10-20-2007, 09:42 PM
that box is about 4.23^3ft after displacement. the only thing thats missing is the driver displacement, which for the XXX i believe is like .29^3ft. which leaves about 4 cubes and a tuning very close to 35 (should be closer to 34 or so).

that box will work fine.

Gilliz
10-20-2007, 09:45 PM
Ok, I'll attemp it. Thanks george, mucho appreciato lol.

IgnoreMe
10-20-2007, 09:46 PM
Ok, I'll attemp it. Thanks george, mucho appreciato lol.

;)

fbi90909
10-20-2007, 10:45 PM
4@30 design is removed. Lol man, I think you may be half deaf? Downsizing does **** and you usually notice it..alot lol.

yeah i grabbed the plans a long long time ago. i had the box in which i could of taken measurements but it just recently was attacked by the rain and i ended up breaking it down to throw it away so i couldn't give you measurements if you wanted.

now i'm not aware of what vehicle you have but you stated you have a trunk. i know you posted the trunk dimensions but before you go building anything remember that you have to get past the trunk opening.
when i used the 4@30hz i was barely able to fit the box thru the opening because i didn't check. i ended up having to remove some trim panels, the trunk lock latch, the spare tire and floor board just to get the box in, and it was a *****. after then i couldn't put the spare or floor board back in.
your going to love that thing.
soon i will be getting a second XXX and next year another saz. probrably run 2 15's sealed since i know i have the space for it. but ported would require me to take out the back seat. :/