PDA

View Full Version : How would one cut a hole like this for a sub?



Glock23
10-15-2007, 03:09 AM
I have 3/4 MDF and I want to cut a hole that lowers the cub into the wood so it's just below flush with the wood. Is this possible ? I'm using a car's spare tire well for the air space and want to make this box a stealth box.


The black line in the photo reps the sub. The green is the MDF and the sub is just below flush with the green. :)

http://img.photobucket.com/albums/v125/Roguewardom/box.jpg

twisztdauthorit
10-15-2007, 03:11 AM
u cant do a flush mount with only 1 board... let alone 3/4
you need 2 pieces of wood, and make the top hole larger

johnson
10-15-2007, 12:46 PM
^ what he said. This was two 3/4" boards.

http://i103.photobucket.com/albums/m127/johnson_n/Photo-0052.jpg

http://i103.photobucket.com/albums/m127/johnson_n/Photo-0053.jpg

TPABlazer
10-15-2007, 02:05 PM
Flush it in with a router, then make a trim panel over top of it.

Stem
10-15-2007, 11:01 PM
you could use either a router or 2 separate sheets, thats a beautiful diagram, the colors are wonderful