View Full Version : Need a box design $$$$

10-11-2007, 09:54 PM
i need a ported box with 6" aeroports designed. 32htz tuning for 2 15" mags....and yes it MUST be aero's..no room for a slot port....3/4" material

T/S parameters: 12 inch 15 inch
Re (coils in series) 3.5 3.5
Fs 30.2 22
Le 3.5 3.7
Qms 4.7 3.7
Qes 0.45 0.39
Qts 0.41 0.35
Cms 121 197
Mms (grams) 228 262
Vas (liters) 39.7 184
Sd (cm^2) 480 810
BL 18.35 18.35
SPL (1W/1M) 85.7 88.8
Power handling RMS 900 950

outer dimensions can be 48"W x 15.5" H x 20"D
looking for 6cf net after port and subs...allow 0.30 for subs

can be a bit wider but prefer to keep these specs. Paying 10 bucks via paypal

10-11-2007, 10:04 PM
front page

10-11-2007, 10:06 PM
How do aero's save space? Meaning if your box needs 60^2 of port area it really shouldn't matter if it's a slot or round port. Unless you plan to underport counting on the aero's to cut down on port noise...

10-11-2007, 10:08 PM
meaning i need to save every bit of space i can, and aeros don't take up the space that 3/4" Materials consume.

10-11-2007, 10:14 PM
i don't want to argue with anyone, and don't really want to debate anything. If i felt like designing myself i would, but i don't. If someone can design it cool, if it can't be done then so be it.

thats why my box is sealed right now, because i don't really think it will fit ported

10-12-2007, 08:15 AM
I will help you, check your PM.