View Full Version : I could have
10-07-2007, 05:02 PM
used the search...but not much time...I am fiberglassing my box to paint it.....now when fiberglassing....after i put a layer of fiberglass down....should i 1. Sand the fiberglass then put on bondo? or 2. Just put bondo over top the fiberglass?....by the way this is my first time fiberglassing lol.
10-07-2007, 05:04 PM
sand/grind the hell out of the fiberglass. get it as smooth as you can, no air pockets, jagged edges. etc, . then proceed with body filler.
10-07-2007, 05:10 PM
yeah thats what i was thinking...oh by the way i forgot to mention fiberglass is a bish lol
10-07-2007, 05:13 PM
its fun when you are good at it
10-07-2007, 05:14 PM
I expect pics of what you are building.
10-07-2007, 05:17 PM
10-07-2007, 05:27 PM
well ....i built my own box...im using fiber glass to cover my imperfections and screwholes when i should have just used bondo i think...i only have the top covered now...i dont know if i should keep going or just switch to bondo.lol
10-07-2007, 05:29 PM
um, wow yeah body filler was the only thing needed to smooth out your box..
10-07-2007, 05:30 PM
well i bought the fiberglass to initially do teh inside and the outside because i had some very little air leaks....shouldi just switch to bondo?
10-07-2007, 05:44 PM
ok i just took all the fiberglass off lol...good ol hammer...and screwdriver...downside is, i cut my self lol...imma just use my bondo i have lol...