PDA

View Full Version : I could have



connersdad19
10-07-2007, 06:02 PM
used the search...but not much time...I am fiberglassing my box to paint it.....now when fiberglassing....after i put a layer of fiberglass down....should i 1. Sand the fiberglass then put on bondo? or 2. Just put bondo over top the fiberglass?....by the way this is my first time fiberglassing lol.

azbass
10-07-2007, 06:04 PM
sand/grind the hell out of the fiberglass. get it as smooth as you can, no air pockets, jagged edges. etc, . then proceed with body filler.

connersdad19
10-07-2007, 06:10 PM
yeah thats what i was thinking...oh by the way i forgot to mention fiberglass is a bish lol

azbass
10-07-2007, 06:13 PM
its fun when you are good at it

http://img516.imageshack.us/img516/1971/img1485yy0.jpg

azbass
10-07-2007, 06:14 PM
I expect pics of what you are building.

regal8r
10-07-2007, 06:17 PM
w3rd

connersdad19
10-07-2007, 06:27 PM
well ....i built my own box...im using fiber glass to cover my imperfections and screwholes when i should have just used bondo i think...i only have the top covered now...i dont know if i should keep going or just switch to bondo.lol

azbass
10-07-2007, 06:29 PM
um, wow yeah body filler was the only thing needed to smooth out your box..

connersdad19
10-07-2007, 06:30 PM
well i bought the fiberglass to initially do teh inside and the outside because i had some very little air leaks....shouldi just switch to bondo?

connersdad19
10-07-2007, 06:44 PM
ok i just took all the fiberglass off lol...good ol hammer...and screwdriver...downside is, i cut my self lol...imma just use my bondo i have lol...