TC-10OEM home audio enclosure worklog**pics

[SQBubble]

so i started a good bit of the box, i ****ed up the flush mount part, gonna do it again tomorow, its sealed, 0.78cu.ft NET, 2"mount baffle and 1"flush mount baffle, all 1" mdf , ill use fiberglass instead of polyfill and im gonna sand the final result like a ***** and gonna use the black ash vinyl laminated for looks, anyways heres the pics;

fiberglass with terminals and the feets of the box with the black ash vinyl;

http://i105.photobucket.com/albums/m239/SQBubble/Home%20Audio%20Project/IMG_2825.jpg

all the cuts;

http://i105.photobucket.com/albums/m239/SQBubble/Home%20Audio%20Project/IMG_2759.jpg



http://i105.photobucket.com/albums/m239/SQBubble/Home%20Audio%20Project/IMG_2803.jpg

http://i105.photobucket.com/albums/m239/SQBubble/Home%20Audio%20Project/IMG_2804.jpg

http://i105.photobucket.com/albums/m239/SQBubble/Home%20Audio%20Project/IMG_2805.jpg


http://i105.photobucket.com/albums/m239/SQBubble/Home%20Audio%20Project/IMG_2806.jpg

http://i105.photobucket.com/albums/m239/SQBubble/Home%20Audio%20Project/IMG_2807.jpg


2x
http://i105.photobucket.com/albums/m239/SQBubble/Home%20Audio%20Project/IMG_2808.jpg

6wood left to cut and 2 tops:

http://i105.photobucket.com/albums/m239/SQBubble/Home%20Audio%20Project/IMG_2809.jpg

[SQBubble]

http://i105.photobucket.com/albums/m239/SQBubble/Home%20Audio%20Project/IMG_2810.jpg

http://i105.photobucket.com/albums/m239/SQBubble/Home%20Audio%20Project/IMG_2811.jpg

after 6cuts, little messy
http://i105.photobucket.com/albums/m239/SQBubble/Home%20Audio%20Project/IMG_2817.jpg


****
http://i105.photobucket.com/albums/m239/SQBubble/Home%20Audio%20Project/IMG_2819.jpg

test fit and little ****
http://i105.photobucket.com/albums/m239/SQBubble/Home%20Audio%20Project/IMG_2820.jpg

http://i105.photobucket.com/albums/m239/SQBubble/Home%20Audio%20Project/IMG_2822.jpg

http://i105.photobucket.com/albums/m239/SQBubble/Home%20Audio%20Project/IMG_2821.jpg


thats it for today, tomorrow should be done.

[ngsm13]

Hawt.

nG

[bigbang]

What kind of external amp are you going to power that with? Looks good. I am running an old Kicker Comp VR in a large sealed box with the 250watt parts express amp with IR remote control. Always wanted to buy those isolation feet, They look ****.

[IamDeMan]

That thing is gonna be strong enough to hold up a corner of the house if it had too. That's a lot of wood for a small sealed enclosure. I think it is safe to say it flex will be minimal LOL. Nice work so far man.

[sqhertz]

x2. that is some thick *** wood. i used 3/4 all around with a double baffle with mine. looks good though. :)


i miss my oem 10...

[rcnshoe]

Box is kinda small

[twisztdauthorit]

nice build.. cant wait to see the end result.. i would also like to know what the powerhouse behind this will be

[ngsm13]

Box is kinda small

Not really... for the sub.

nG

[SQBubble]

well, i've done a good bit today, and still working again, hope to finish all the sanding today so that tomorrow I apply the vinyl and be done with it, started sanding one of the enclosure, heres a little update; and btw, itll be power by my car audio amplifier(zenon 2.2krms @1ohm) with a deep cycle and charger, little ghetto and all but itll be good enough, and imma forget the flush mount, i think itll look better without it. also, my purpose is not spl but sq and nice sounding system for music and movies mainly;


http://i105.photobucket.com/albums/m239/SQBubble/Home%20Audio%20Project/IMG_2843.jpg

http://i105.photobucket.com/albums/m239/SQBubble/Home%20Audio%20Project/IMG_2844.jpg

http://i105.photobucket.com/albums/m239/SQBubble/Home%20Audio%20Project/IMG_2845.jpg

http://i105.photobucket.com/albums/m239/SQBubble/Home%20Audio%20Project/IMG_2849.jpg

http://i105.photobucket.com/albums/m239/SQBubble/Home%20Audio%20Project/IMG_2847.jpg

http://i105.photobucket.com/albums/m239/SQBubble/Home%20Audio%20Project/IMG_2852.jpg

http://i105.photobucket.com/albums/m239/SQBubble/Home%20Audio%20Project/IMG_2854.jpg

http://i105.photobucket.com/albums/m239/SQBubble/Home%20Audio%20Project/IMG_2858.jpg


the difference between sanded and not
http://i105.photobucket.com/albums/m239/SQBubble/Home%20Audio%20Project/IMG_2861.jpg

http://i105.photobucket.com/albums/m239/SQBubble/Home%20Audio%20Project/IMG_2863.jpg


thx for the comments, tomorrow should be done for good.

[ngsm13]

Solid.

nG

[2kchevy06civic]

looks great man.

[req]

orgasmic.

[SQBubble]

well, i got the time to finish off 1 of the enclosure, turned out neat, but i failed putting the vinyl on it, looks decent though. cant wait to finish the second one and use them both :D

http://i105.photobucket.com/albums/m239/SQBubble/Home%20Audio%20Project/IMG_2873.jpg

http://i105.photobucket.com/albums/m239/SQBubble/Home%20Audio%20Project/IMG_2875.jpg

http://i105.photobucket.com/albums/m239/SQBubble/Home%20Audio%20Project/IMG_2877.jpg

http://i105.photobucket.com/albums/m239/SQBubble/Home%20Audio%20Project/IMG_2882.jpg

http://i105.photobucket.com/albums/m239/SQBubble/Home%20Audio%20Project/IMG_2883.jpg

http://i105.photobucket.com/albums/m239/SQBubble/Home%20Audio%20Project/IMG_2885.jpg

http://i105.photobucket.com/albums/m239/SQBubble/Home%20Audio%20Project/IMG_2887.jpg

http://i105.photobucket.com/albums/m239/SQBubble/Home%20Audio%20Project/IMG_2891.jpg














:D

[SQBubble]

Not really... for the sub.

nG

x2, called tc and they said anywhere between .5cu.ft and 1cu.ft should be good

[SQBubble]

well, everything is done, putted some speaker gasketing tape, all wired, i like the feets, the vinyls was a PITA , i had to take of all the wood dust so it stick rite and all ; heres the final result:

http://i105.photobucket.com/albums/m239/SQBubble/Home%20Audio%20Project/IMG_2895.jpg

http://i105.photobucket.com/albums/m239/SQBubble/Home%20Audio%20Project/IMG_2896.jpg

http://i105.photobucket.com/albums/m239/SQBubble/Home%20Audio%20Project/IMG_2897.jpg

http://i105.photobucket.com/albums/m239/SQBubble/Home%20Audio%20Project/IMG_2901.jpg


http://i105.photobucket.com/albums/m239/SQBubble/Home%20Audio%20Project/IMG_2905.jpg


http://i105.photobucket.com/albums/m239/SQBubble/Home%20Audio%20Project/IMG_2908.jpg

[twisztdauthorit]

****... that a good job. those surrounds look beefy!

[Immacomputer]

Eh, not too bad of a job with the vinyl; that **** can be relentless. The black vinyl looks really nice with those subs and with the floors (is that real oak?).

[SQBubble]

****... that a good job. those surrounds look beefy!

thx, yea they rly are beefy and good looking


Eh, not too bad of a job with the vinyl; that **** can be relentless. The black vinyl looks really nice with those subs and with the floors (is that real oak?).

thx idk if its real oak... but thats not my room, its the basement



I took a lil listen of 1of them and it sound really clean and natural, i love these thing, it shakes the floor, they just need more eq for the low-end, other than that, they are sweet little beast. it's pretty tempting to get a real home amplifier for them......... hate the look of the getthoness and beeing always worried of voltage and all!!

I spotted this thing:
http://www.partsexpress.com/pe/pshowdetl.cfm?&Partnumber=300-810&CFID=2863864&CFTOKEN=50718961

I like that there is the little eq, its clean, only downside is that itll only give 500rms a piece, yall think itll be enough to make them move ?

the other choice is the xti2000 with a cleanbox or wtv the name is... but its lot more expansive......

[Immacomputer]

How do you have them powered now?

[SQBubble]

http://i105.photobucket.com/albums/m239/SQBubble/Home%20Audio%20Project/IMG_2910.jpg

the source is the computer.

[D3r3k]

nice job on the box's man

[vasilios]

What is the rms on those 10s?

Very nice job, by the way.

[SQBubble]

800rms