PDA

View Full Version : Is this SPL box plan okay?



Basshead808
10-05-2007, 11:07 PM
Going in a 98-2004 Camaro.. Running an Orion 1200d and a 12" Resonant Engineering SX:


http://subwoofertools.com/forum/ported-box.asp?Ew=29.5&Eh=14&Dia=6&Xmax=22&Vd=.16&NumW=1&Vb=3.5&Fb=40&Qts=&Vas=&Fs=&CE=0

CRXBMPN
10-05-2007, 11:12 PM
i think you should cut back a bit on the box size and port width, they go hand in hand if you dont change the length... and i'd cut length too, seeing how its a hatch and its probably going to peak in the 50's or higher...

iagrdshaka
10-05-2007, 11:15 PM
I would make the box a little smaller, especially if its a burp box

Basshead808
10-05-2007, 11:17 PM
disregard this post..

Basshead808
10-05-2007, 11:21 PM
How about this one?

http://subwoofertools.com/forum/ported-box.asp?Ew=30.5&Eh=14.25&Dia=6&Xmax=22&Vd=.16&NumW=1&Vb=2&Fb=40&Qts=&Vas=&Fs=&CE=0

Basshead808
10-06-2007, 12:48 AM
mission complete:D thanks alot!

PSturmer
10-06-2007, 03:07 AM
you should not put a turn in it if its a burp box. aeros are a good thing to use because you can easily change tuning.

mlstrass
10-06-2007, 06:09 AM
seems like a lot of port area. You can change the xmax number to change the port area...

PSturmer
10-06-2007, 06:24 PM
seems like a lot of port area. You can change the xmax number to change the port area...

you want port area

Lakota
10-07-2007, 12:00 AM
I'd do 1.5-2 cubes with 2 4" or 1 6" aero.

PSturmer
10-07-2007, 12:52 AM
I'd do 1.5-2 cubes with 2 4" or 1 6" aero.

x2

more power would help also.

80INCHES
10-07-2007, 01:16 AM
I'd do 1.5-2 cubes with 2 4" or 1 6" aero.

agreed
2 cubes with 2 4inch or 1 6 inch aeroport tuned to 45hz will make a good spl box

80