PDA

View Full Version : amp is too strong



carlos18
10-04-2007, 05:09 PM
hello everybody, i am just learning about car audio so dont be to harsh on me. First, i got 4 SPR-17C 6.5 alpine type-R, and i want to power them with my p.450 4channel RF amp. the amps maw power is 1752, and rms is 584. How do i wire them so i wont blow them?

azbass
10-04-2007, 05:11 PM
its a 4 chan amp, you wire each speaker to each channel

2002XLT
10-04-2007, 05:11 PM
Nm. ^^^^^^^6

carlos18
10-04-2007, 05:30 PM
will it be ok, if i wire them to each channel, i end up with a 2ohm load with 115rms. the speakers power handle 100rms, and 300max. will that be ok, they will only be used for highs

DejaWiz
10-04-2007, 09:07 PM
will it be ok, if i wire them to each channel, i end up with a 2ohm load with 115rms. the speakers power handle 100rms, and 300max. will that be ok, they will only be used for highs

If they are 4 ohm speakers, they will present the amp with a 4 ohm load per channel.

CRAZYCORNUTS18
10-04-2007, 09:09 PM
If they are 4 ohm speakers, they will present the amp with a 4 ohm load per channel.

true that

the727kid
10-05-2007, 12:18 AM
Set your gains accordingly.

carlos18
10-05-2007, 02:46 AM
ok guys, thanks i didnt know that.