PDA

View Full Version : 9515 ports?

snarl2004
09-25-2007, 07:09 PM
I am building a box for a 9515 getting 2800rms. It will be tuned to 38-40hz and the cuft will be between 4 and 5. Now my question is should i use a slot port or aero ports?

If i use aero ports they will be flared 4" diameter ports. How many should i use?

KnOkIn It 420
09-25-2007, 07:13 PM
Do a slot port,or ur gonna have to use atleast 5+ 4"areo,or u could do 2-3 6" areos.

skeptikal
09-25-2007, 07:13 PM
2 6" aeros.

TheFiverMan
09-25-2007, 07:16 PM
4 4" aeros..

snarl2004
09-25-2007, 07:19 PM
would there be any difference by ear between the aero ports and slot ports?

iagrdshaka
09-26-2007, 02:54 AM
Do a slot port,or ur gonna have to use atleast 5+ 4"areo,or u could do 2-3 6" areos.

sounds like too many

mlstrass
09-26-2007, 03:03 AM
no diff by ear. DD recommends 16^2 per cube, so just do a big slot port. I've built a few boxes for 9515's, 4.5cubes @ 35Hz and they hit hard and sound good in that enclosure.

mjf
09-26-2007, 04:05 AM
sounds like too many

roughly each 4" aero gives 12.56"^2 of port area.

12.56*5=62.8/16=3.925<-- not enough 4 cubes gross
12.56*6=75.36/16=4.71<--- just about what he needs

each 6" will give roughly 28.26"^2 of port area.

28.26*2=56.52/16=3.5325<-- not enough for 4 gross
28.26*3=84.78/16=5.29875<-- too much for 5 gross