PDA

View Full Version : DIY Mids And Highs



massiveaudiocw
09-24-2007, 03:36 PM
Ok well getting ready to start work on my van and looks like im going to have to make a few slightly changes. The plans were as followed

Midbass 60-100hz : Sundown Audio SD-1 10" x4
Mids 100-2500hz : PHL 2002 x2
Mids/Highs 2500hz + : Image Dynamics CD1E Mini x2
Mids/High Amps : Sundown 100.4 x3 (Bridged To Each Driver)

Here is the problem, i dont have the space under the dash or anywere to mount my ID horns. I deffintly want to keep the midbass. So what i need is suggests for mids and highs drivers. What im looking for is an extremly loud and clean sound mids ands highs set up to keep up with my wall. Power will be coming from sundown amps.

Corey

gamecock guru
09-25-2007, 10:53 PM
Ok well getting ready to start work on my van and looks like im going to have to make a few slightly changes. The plans were as followed

Midbass 60-100hz : Sundown Audio SD-1 10" x4
Mids 100-2500hz : PHL 2002 x2
Mids/Highs 2500hz + : Image Dynamics CD1E Mini x2
Mids/High Amps : Sundown 100.4 x3 (Bridged To Each Driver)

Here is the problem, i dont have the space under the dash or anywere to mount my ID horns. I deffintly want to keep the midbass. So what i need is suggests for mids and highs drivers. What im looking for is an extremly loud and clean sound mids ands highs set up to keep up with my wall. Power will be coming from sundown amps.

Corey

this is the worng place to ask for help concerning this matter. check out d.i.yforum.com

what your looking for i'm looking for.

kross
09-26-2007, 12:52 AM
I think you meant diymobileaudio.com

gamecock guru
09-26-2007, 02:45 AM
I think you meant diymobileaudio.com

i think... nobody was talking to you. get somewhere:verymad:

Scoobydoo
09-26-2007, 02:49 AM
http://d.i.yforum.com/


Under Construction
The site you were trying to reach does not currently have a default page. It may be in the process of being upgraded.


--------------------------------------------------------------------------------

Please try this site again later. If you still experience the problem, try contacting the Web site administrator.

spudracer326
09-26-2007, 02:51 AM
well that seems awfully high to cross those horns at but since you cant do those it doesnt really matter...horns unfortunatly are not a "plug and play" driver and you generaly have to cut and move stuff around to get them to fit and sound proper....also that is to much power for those horns....there highly efficient and will make your ears bleed with little power...i honestly would say a couple sets of the new type r's(i know i recomend them to everyone) with 300-500rms to each set of mid and tweet...they get loud have a ton of midbass and a strong tweeter...

gamecock guru
09-26-2007, 02:56 AM
well that seems awfully high to cross those horns at but since you cant do those it doesnt really matter...horns unfortunatly are not a "plug and play" driver and you generaly have to cut and move stuff around to get them to fit and sound proper....also that is to much power for those horns....there highly efficient and will make your ears bleed with little power...i honestly would say a couple sets of the new type r's(i know i recomend them to everyone) with 300-500rms to each set of mid and tweet...they get loud have a ton of midbass and a strong tweeter...s

i had a set of type r's a couple of years ago. wasn't too happy. what's soo speacial about them now?

///M5
09-27-2007, 02:31 PM
s

i had a set of type r's a couple of years ago. wasn't too happy. what's soo speacial about them now?

they still sound like arse

nismos14
09-27-2007, 04:53 PM
And 4 10's for midbass? Jeez.

genxx
09-30-2007, 07:23 AM
I think you meant diymobileaudio.com

You can find all the info you need at the site Kross listed.

Why in the hell are trying to run 4 x 10" for midbass. Complete overkill.IMO

alteraudiousa
09-30-2007, 10:34 AM
so what is your budget in all of this?

ultimate157
09-30-2007, 11:18 AM
well that seems awfully high to cross those horns at but since you cant do those it doesnt really matter...horns unfortunatly are not a "plug and play" driver and you generaly have to cut and move stuff around to get them to fit and sound proper....also that is to much power for those horns....there highly efficient and will make your ears bleed with little power...i honestly would say a couple sets of the new type r's(i know i recomend them to everyone) with 300-500rms to each set of mid and tweet...they get loud have a ton of midbass and a strong tweeter...

300 to 500w on a set of type-r comps? lawl. Their RMS is only 70w. You fail.

req
09-30-2007, 02:41 PM
you should make the horns fit anyway.