PDA

View Full Version : Need a Sub Box for 3 10" subs



hotboy251
03-13-2003, 11:00 PM
I heard your fourm was the best so need a speaker box built for 3 subs each needing the following air space

(the specs below are for each individual sub)

Recommended Minimum Volume (Cubic Feet) - .375
Recommended Maximum Volume (Cubic Feet) - 1.75

Depth Top mount - 4.6875 in.
Depth Bottom mount - 4.1875 in.
Cutout - 9.3125 in.


or do any one know were i can get a prebuilt box that will be perfect for these subs

Rockford Fosgate 10 Inch Sub Woofer
RFZ 2810 - 8 Ohm

p.s. im gonna wire them in parallel for 2ohm load with a Bazooka El1500 for 500watts@2ohms

ridered36
03-13-2003, 11:03 PM
If your needed somone to build u a box, e-mail me at morriss@grics.net and we'll get you goin.

Woodmister
03-14-2003, 02:25 PM
Ya, usually they dont sell prefabed ones @ Best Buy, etc. You usually have to find a local car stero place, they build it, they have one already made, or you can take a shot @ it. Its not as hard as first timers think it is, just takes time...

85ss
03-14-2003, 03:14 PM
me and abcdefg can make you that box for about 50+shipping. Holler at me at my emailing adress below.

hotboy251
03-14-2003, 03:47 PM
Can you all post some pics of your work so i can see whos the best :D

ridered36
03-14-2003, 03:59 PM
I have one box posted in the photo section and if u want more pm me and ill send em to u

bumpin_8605
03-14-2003, 06:25 PM
i also could build u one. i have some pics in the gallery if u would like to see them. if u want to get a hold of me my addys r in my sig. with out knowing shipping i think i could do it for 65 shipped

hotboy251
03-15-2003, 11:48 AM
Would i benefit from a bandpass box or should I stick with a sealed? is it true that subs in a bandpass require more power to the subs than a sealed or is a sealed just more efficent thx.

bumpin_8605
03-15-2003, 05:36 PM
Originally posted by hotboy251
Would i benefit from a bandpass box or should I stick with a sealed? is it true that subs in a bandpass require more power to the subs than a sealed or is a sealed just more efficent thx.


i have always hated bandpass boxes, they make the subs sound quieter. i would go with sealed or maybe even a ported box

hotboy251
03-21-2003, 10:10 PM
OK Im gonna try to do it myself wish me luck ill post pics of my progress hopefully ill end up with somthin like this...........

hotboy251
03-21-2003, 10:39 PM
like this one

more_spl
03-22-2003, 12:57 AM
hey, that box is fine, but:::::: you see the speperator pieces on the inside in between each chamber? see they are cut out like that all gay? Make the divider boards solid and put them in, so you don't have the "push-pull" effect going on for all subs, especially bad if one or 2 blow... give them each there own chamber

hotboy251
03-24-2003, 09:04 PM
one more thing the site has the mesurements of the box on the web site should i just use those and my box should be the same right? unless i f#$% it up lol.:D

abcdefg
03-24-2003, 09:07 PM
oh, make sure u dont cut he hole 10 inches

hotboy251
03-24-2003, 10:19 PM
yea at lease i know that much:D

abcdefg
03-25-2003, 08:22 PM
Originally posted by hotboy251
yea at lease i know that much:D

just makin sure, b/c on my first box attempt i was gonna cut out a 10 inch hole but now i know about it

more_spl
03-26-2003, 09:36 PM
ya, it'll be a 2.66Ohm load, not 2. but just take your time and research proper box bu8lding tech's and you'll do fine.. my first box i ever made came out perfect