Done the calculations...just a double check?

[hoxie08]

Okay, so a.....


12" RE SE
2 feet^3 (For the sub, after port displacement...)
Tuned to ~32 hz


According to this http://www.carstereo.com/help2/Articles.cfm?id=31, I need ~32 in^2 of port area (going with a slot port, 12.75" x 2.5") Now it also says it needs to be 29 inches long....is that correct? The port is kinda concerning me...

[andytb]

go to reaudio.com

[jrekully17]

wow same setup as me, lol wat amp u have

[hoxie08]

Right now I have a JL e1200. Not sure how well it'll push the RE but ported I'm sure it'll do fine. It managed to blow my 10w3v2 quite easily in a sealed box, pretty sure that was just clipping though.


wow same setup as me, lol wat amp u have

[hoxie08]

go to reaudio.com

Yeah, all I've found there is that I need 2 cubic feet after port displacement....any link to specific port info?

[jrekully17]

how many watts is that at 2ohms..i have a kicker zx750

[andytb]

go to the calculator

[jrekully17]

28-32in

[hoxie08]

how many watts is that at 2ohms..i have a kicker zx750

Heh, have to look at the box, not even sure, not sure what it really runs at either since there is no birth sheet.