PDA

View Full Version : RE ported box design



whitemdx
09-05-2007, 03:25 AM
I was wondering if anyone confirmed the accuracy of the ported box design on RE's website. I am building a slotted port for 1 RE MX 12", 2 ft^3 @ 33 hz. Displacement is .19 ft^3. Can someone verify these # are good to go:

Outer dimensions (will be using 3/4" MDF): 30L x 14H x 15D
port height = 12.5"
port width = 2.5"
total port length = 30"
net volume = 2.23 ft^3
Fb = 33.01 Hz

http://img390.imageshack.us/img390/6034/remx1220at33hzpage1imagjh9.th.jpg (http://img390.imageshack.us/my.php?image=remx1220at33hzpage1imagjh9.jpg)

Doingstuffwell
09-05-2007, 03:28 AM
only 2 cubes?



hmmm. i dunno. im not an expert at boxes.

whitemdx
09-05-2007, 03:31 AM
only 2 cubes?



hmmm. i dunno. im not an expert at boxes.

I went with RE recommendation, did a search here and couldn't pull up any user recommendation.

whitemdx
09-05-2007, 03:31 AM
only 2 cubes?



hmmm. i dunno. im not an expert at boxes.

I went with RE's recommendation, did a search here and couldn't pull up any user recommendation.

Doingstuffwell
09-05-2007, 03:49 AM
im just thinking of all the air you gotta move around in that car.


id think at LEAST 3 cubes?