View Full Version : starting a box for my silverado 2 10" r's

09-04-2007, 02:46 AM
I got tired of my subs being all sealed up under my rear seats so i decided to pull my jump seat in the front row and replace it with a ported box. these subs performed so much better in a pre-fab ported box in my old suburban, so i'm bringing it back, this time in a custom ported box. came up with this design: let me know if it looks ok. if somebody can atleast double check it and give the OK i will start cutting tomorrow and will have pics up. subs are alpine 10" type r swr-1041d. these are the old style 300 watt rms subs, dual 4 ohm. thanks



09-04-2007, 11:56 PM
Please? :eyebrow:

09-05-2007, 12:59 AM
that box will sound good with the right amount of power.
subs up port firing.....?
subs up with port firing towards rear is what i would try.
but from my exsperence with those subs in a x-tra cab they sound best behind the drivers seat with subs up port firing towards passenger.

09-05-2007, 02:08 AM
yeah, subs up port firing to rear. throwing 350 rms a piece to each R. I have the day off tomorrow so that is when I shall begin.

09-06-2007, 01:41 AM
My wonderful cuts using a jigsaw http://i27.photobucket.com/albums/c174/thur5d4yf4n/IMG_0663rs.jpg

My work bench: http://i27.photobucket.com/albums/c174/thur5d4yf4n/IMG_0667rs.jpg

Tomorrow I cut holes for subs, glue and screw, then let her rip. then i will pretty it up if it sounds good.