PDA

View Full Version : F150 supercrew. No room for pioneer sub



kc_f150
09-02-2007, 07:39 PM
Hi all,

I received a pionner TS-W254C 10" subwoofer from a friend, and I was thinking on creating an vented enclosure for it and installing it under the rear seat of my 06 F150 supercrew. However, the speaker's hight is 6" and I don't know if an enclosure with a 7" mounting depth will be good enough. I don't think I can build an enclosure with a mounting depth bigger thant 7" because the enclouse will not fit under the seat. Has anyone had any success installing a subwoofer this tall without lifting the seat? Please help!

Thanks!



SUBWOOFER SPECS

Size: 10 inch
Rec. Sealed Box Dims: 0.80 - 0.80 cu. ft.
Rec. Ported Box Dims: 0.90 - 0.90 cu. ft.
Free Air Usage: not recommended
Sensitivity: 87 dB
Frequency Response: 18-2,500 Hz
Recommended RMS Power: 250W
Peak Power Handling: 500W
Impedance: 4 ohms subwoofer wiring options

young_gun
09-07-2007, 01:05 PM
As long as you have at least 1/2" of space from the back of the magnet to the box your ok. Thats cuttingit close, but you have to do what you have to do, with 1" I think you'll be cool.

mavster
09-07-2007, 01:09 PM
Why not get a pioneer shallow sub?

kc_f150
09-09-2007, 04:51 PM
because the sub was free, but now I'm thinking about getting 2 8" kicker subwoofers or a shallow sub. Any suggestions?

young_gun
09-09-2007, 06:37 PM
I've heard a set of the slim Kickers and was -very- impressed

kc_f150
09-09-2007, 07:54 PM
what about a KICKER CVT10 10" 800W Shallow Mount SVC SUBWOOFER?


Specs
Model : 07CVT104
Max Power Handling : 800W
RMS Power Handling : 400W
Nominal Impedance : 2 ohm (single)
Resonance Frequency : 32.7Hz
Frequency Response : 25- 350 Hz
Sensitivity : 85.5 dB
Sealed Enclosure : 0.8 - 3.0 cu.ft.
Vented Enclosure : 1.25 - 1.75 cu.ft.
Mounting Depth : 4-3/16"
Hole Cutout Diameter : 9-1/8"

young_gun
09-09-2007, 09:42 PM
what about a KICKER CVT10 10" 800W Shallow Mount SVC SUBWOOFER?


Specs
Model : 07CVT104
Max Power Handling : 800W
RMS Power Handling : 400W
Nominal Impedance : 2 ohm (single)
Resonance Frequency : 32.7Hz
Frequency Response : 25- 350 Hz
Sensitivity : 85.5 dB
Sealed Enclosure : 0.8 - 3.0 cu.ft.
Vented Enclosure : 1.25 - 1.75 cu.ft.
Mounting Depth : 4-3/16"
Hole Cutout Diameter : 9-1/8"
Thats what i was referencing :yumyum: