PDA

View Full Version : need a fart box design



MemphisCherokee
09-01-2007, 03:08 PM
looking for a design
for 2 memphis PR12's
max dimentions: 20 deep, 18 tall, 40 wide
t/s:
fs:32hz
vas:2.16 cf
mms:136 grams
xmech:.352 in
qms:5.37
qes:.42
qts:.39
sensitivity:88 dB
coil diameter:2 in
Bl:15.41
coil config: single 4
2 drivers
250w each
im looking for purely SPL
total fart box
around 50 Hz or whatever will get me the most output
honestly, i'd rather not pay for the design, im broke enough as it is
i would usualy do it my self but i dont have the time right now and ive never built a purely spl box
all i really need is airspace, port area/length, and orientation

MemphisCherokee
09-01-2007, 03:10 PM
actually, im less looking for a straight up design as i am looking for suggestions and opinions concerning size and tuning/ orientation
its going in a jeep cherokee

CaliforniabOY5
09-01-2007, 03:20 PM
put paypal ready in your title and u'll have more than enough ppl wanting to help ;)

MemphisCherokee
09-01-2007, 03:21 PM
thats the thing, im ****ing broke, hahahaha

Louisiana_CRX
09-01-2007, 03:28 PM
Do a CRX style box...subs up port back.....put each sub in a 1.5 cu ft chamber counting port and basket displacement...use 2 5" ports per chamber...PVC or aeros even better if broke make your own....make each port length about....16" long.....You should be set....:)

MemphisCherokee
09-01-2007, 03:32 PM
allrighty
thanks alot
now, port back, this is in the trunk space of a jeep, so.... should i but the back seat down?

MemphisCherokee
09-01-2007, 03:38 PM
i didnt even pay attention, i thot u sed port forward
anyways
thnaks alot man

Louisiana_CRX
09-01-2007, 03:42 PM
Try to fit the box so the port is about 7" from the rear hatch ....Have subs firing up as close to the rear seat as possible......The box will probally be sorta shallow...make sure you have at least 2" below the magnet so the subs can breath...If you share chamber....with subs...I would...put the ports fairly close to each other side by side ...and have them opposite of where your vehicle meters best from.....For instance...you meter best on passenger side...have the two ports on the drivers side of the box towards the rear.....Hope this helps :)

MemphisCherokee
09-01-2007, 03:48 PM
thanks bro
very helpful
i owe ya one
barely missed 3rd place last night and i intend to take atleast 3rd at battle of the highschools later this month