Cutting holes for Aero's?

[THXdts]

I am using external aero's and am wondering what circle size you need for them? Or what part do you have to measure off of?

[tommyk90]

You use the internal (smaller) flare to mark the hole for the flare with the mounting flange. :)

Just place the internal flare on the box where you want the aeroport to mount, then trace around it.

[ngsm13]

You use the internal (smaller) flare to mark the hole for the flare with the mounting flange. :)

Just place the internal flare on the box where you want the aeroport to mount, then trace around it.

WINNAR!!!!

nG

[THXdts]

Ah gotcha, thank you.

[Lakota]

You may notice that the inside of the smaller flare will sit perfectly on the inside of the bigger flare:)

[THXdts]

Another quick question, what size screws do you guys personally use to mount the aeros to the box?

[tommyk90]

Another quick question, what size screws do you guys personally use to mount the aeros to the box?

I just use the same screws I use for my box building.

[THXdts]

I just use the same screws I use for my box building.

For external?

[tommyk90]

For external?

yup

[quakerroatmeal]

I was going to say, unless you go the 6" aero's where the inside flares are the same as the outside. But I guess he figured it out, he must have got the 4" ones.