View Full Version : Can someone figure these dimensions...
08-30-2007, 01:40 PM
My bro stopped by and gave me a slot-ported box for 1 12" sub. I have taken down the dimensions and the port size/length. Could someone figure out the air volume and possbily reccommend me a sub that will work with the port and box air volume? My amp will do 600watts bridged into 4ohm load.
Box looks like this...
08-30-2007, 02:12 PM
i imagine those are external dimensions you gave? i also see that the ends are recessed in....by how much? also, is that 1" mdf?
08-30-2007, 02:37 PM
Sorry, just woke up. Inside dimensions:
3/4" MDF 26.5W x 14.25H x 13.5D
Port area is still the same
08-30-2007, 10:52 PM
Can anyone help me out? I could do it if it were sealed, but I haven't the clue on how to do ported....
08-31-2007, 02:35 PM
2.675cu' tuned to 35hz.
09-01-2007, 12:45 AM
What would be a good candidate for this enclosure? I would need something that can handle 500-600rms. Old school Orion, Fi Audio, Massive, any ideas?
09-01-2007, 12:50 AM
If you feel like dicing it a smidge, make it a square, and you can use a super nice Kicker 12" L7. You're undercutting it by 150w but it'll still be loud. Or an L5 and it'll be right on the money (600w amp @ 4 ohms ---> 600w sub @ 4 ohms). My $.02
09-02-2007, 12:59 PM
there are a lot of good subs out there....you'll have to look around...12"DD??
09-02-2007, 03:38 PM
I just want something that will hit hard and match the air volume in the box.